저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인
Gray thermal paste in a 1.5 g white syringe with measurement markings and a rubber cap

Zalman

Zalman ZM-STC8 thermal paste 1.5 g 8.3 W/m·K

SKU CH-MATV-XTJ5Z MPN ZM-STC8

High-conductivity 8.3 W/m·K thermal paste in a 1.5 g syringe with graduation marks for precise CPU and GPU application

  • High thermal conductivity of 8.3 W/m·K efficiently transfers heat from CPU or GPU
  • Non-electrically conductive formula protects components from short circuits during application
  • Graduated syringe markings enable precise, repeatable dispensing for multiple uses
  • Optimal viscosity of 350–480 Pa.s spreads evenly without overflow on any chip surface
  • RoHS-compliant, environmentally safe materials ensure hazard-free handling and disposal

Thermal paste for CPU and GPU cooling

Zalman ZM-STC8 is a 1.5 g syringe of gray thermal compound rated at 8.3 W/m·K. The silicone-based formula contains silicone dioxide, aluminum oxide and zinc oxide with no electrical conductivity. Viscosity measures 350 to 480 Pa.s and the operating range spans -40 to 200 °C. A rubber cap prevents the paste from drying out between uses.

Builders who need precise application and re-use

The graduated syringe lets you measure the exact amount required for a CPU or GPU, making it practical for single builds or multiple installations. It suits standard desktop coolers and graphics cards where a non-conductive, medium-viscosity paste is specified. Buyers needing larger volumes for production lines or very low-viscosity compounds for direct-die laptop chips should consider other options.

8.3 W/m·K thermal conductivity

This figure is the primary performance metric supplied for the ZM-STC8 model. It sits between the 7.2 W/m·K and 9.1 W/m·K ratings of the sibling STC7 and STC9 products in the same range. Match this value to the requirement in your cooler or component manual to confirm suitability.

주요 특징

  • High thermal conductivity of 8.3 W/m·K efficiently transfers heat from CPU or GPU
  • Non-electrically conductive formula protects components from short circuits during application
  • Graduated syringe markings enable precise, repeatable dispensing for multiple uses
  • Optimal viscosity of 350–480 Pa.s spreads evenly without overflow on any chip surface
  • RoHS-compliant, environmentally safe materials ensure hazard-free handling and disposal

사양

이 상품에 대해 아직 공개된 사양이 없습니다.

이 상품에 대한 질문

How often will the 1.5 g syringe of ZM-STC8 need to be replaced?

The syringe holds 1.5 g of compound; typical CPU applications use roughly 0.1 g, so one tube covers many installations and only needs replacing when the rubber cap no longer prevents the paste from hardening.

What is the first limit reached when the paste runs at its maximum 200 °C operating temperature?

The rated operating ceiling is 200 °C; sustained use at that temperature is the thermal limit the material is specified to withstand.

How much heat does the 8.3 W/m·K conductivity move during all-day operation?

At 8.3 W/m·K the compound transfers heat efficiently between the chip and cooler, keeping junction temperatures lower than lower-conductivity pastes under continuous load.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.