Zyvpee
Zyvpee D07F-24SG 01A 75mm 24V 0.15A 3-pin blower case fan
75 mm blower-style case fan with dual-ball bearings, 24 V 0.15 A three-pin power and 30 mm thickness
- TypeCase Fan
- CompatibilityCase
- Bearing Type2 Ball
- Power Connector3 Pin
- ColorBlack
- LEDNo
- 75 mm blower design directs focused airflow through tight spaces
- Dual ball bearing reduces friction for longer operational life
- 24 V 0.15 A rating keeps power draw low in industrial systems
- Three-pin connector enables straightforward motherboard or controller hookup
- Compact 75 × 30 mm frame fits small-form-factor and inverter enclosures
75 mm blower fan for 24 V systems
This 75 by 30 mm case fan runs on 24 V at 0.15 A and uses a 3-pin power connector. Its blower layout pushes air through a narrow exhaust, making it suited to tight enclosures or inverter cooling where directional flow is required. The two-ball bearing is built for continuous operation in industrial or embedded chassis. Black frame with no LED keeps the appearance neutral.
Replaces axial fans when exhaust path is restricted
An axial fan of the same footprint moves air sideways, which can stall against dense fins or a closed panel. This blower forces air out through a focused nozzle, so the upgrade is worthwhile when the chassis vents through a small grille or a duct. Builders who need intake-style dispersion or silent low-RPM running should choose a different geometry.
Steady output under constant load
Two-ball bearing construction maintains consistent speed without the wear pattern that sleeve bearings develop over long duty cycles. The 3-pin connection reports tachometer data so the system can verify rpm in real time. With no PWM wire the fan runs at full voltage continuously, delivering stable airflow as long as the 24 V supply remains stable.
주요 특징
- 75 mm blower design directs focused airflow through tight spaces
- Dual ball bearing reduces friction for longer operational life
- 24 V 0.15 A rating keeps power draw low in industrial systems
- Three-pin connector enables straightforward motherboard or controller hookup
- Compact 75 × 30 mm frame fits small-form-factor and inverter enclosures
사양
| Brand | Zyvpee |
|---|---|
| Series | D07F-24SG |
| Model | D07F-24SG |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | 2 Ball |
| Power Connector | 3 Pin |
| Color | Black |
| LED | No |
| Features | Blower |
| Dimensions | 75*30mm |
이 상품에 대한 질문
Will the 75mm by 30mm blower fit my inverter chassis?
The fan measures 75mm wide and 30mm thick, so verify your enclosure has at least that much clearance for a blower-style housing.
How do I connect the 3-pin plug to a 24V supply without reversing polarity?
Match the three wires to the header in the order shown on the fan label; the middle wire is typically the tachometer signal, not power.
When should I replace the 2-ball bearing assembly?
Plan replacement if the blower develops audible rumble or vibration, which indicates the dual ball bearings are wearing after extended 24V operation.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$0.82
0.0000105BTC
재고 있음