Zyvpee
Zyvpee FFC1212DE 120×38mm 12V 2.4A 4-wire green LED case fan
120 mm × 38 mm case fan with green LED, 12 V 2.4 A four-wire power and dual-ball bearings
- TypeCase Fan
- CompatibilityCase
- Bearing Type2 Ball
- Power ConnectorSee Pics
- ColorBlack
- LEDGreen
- High airflow for servers from 120×38 mm frame
- Dual-ball bearing ensures long service life
- Green LED adds visible status indication
- 12 V 2.4 A 4-wire PWM enables precise speed control
- Delta 12038 design built for continuous operation
Zyvpee FFC1212DE 120×38mm Server Fan
The Zyvpee FFC1212DE is a 120mm by 38mm DC axial fan built for server and case cooling. It runs on 12V power and draws 2.4A through a 4-wire connector. Green LED lighting adds visual indication inside the chassis. The 2-ball bearing design supports continuous high-speed operation.
Suited for high-airflow server builds
This fan suits builders who need maximum airflow from a 120mm frame and accept the 38mm thickness. It is not for systems limited to slim profiles or lower power budgets. The 2.4A current draw requires a header or controller rated for that load. Green LEDs are fixed colour and cannot be changed.
38mm thickness decides fit
The single specification that decides compatibility is the 38mm frame depth. Verify that your case or server chassis has clearance for this dimension before purchase. The 120mm mounting holes are standard but the depth is not. Power connector pinout must match the 4-wire layout shown in the product photos.
주요 특징
- High airflow for servers from 120×38 mm frame
- Dual-ball bearing ensures long service life
- Green LED adds visible status indication
- 12 V 2.4 A 4-wire PWM enables precise speed control
- Delta 12038 design built for continuous operation
사양
| Series | FFC1212DE |
|---|---|
| Model | FFC1212DE |
| Type | Case Fan |
| Compatibility | Case |
| Bearing Type | 2 Ball |
| Power Connector | See Pics |
| Color | Black |
| LED | Green |
| Features | DC Axial Fan |
| Dimensions | 120*38mm |
이 상품에 대한 질문
Does the 120 mm by 38 mm frame match standard 120 mm mounting holes?
The fan frame is 120 mm square and 38 mm thick, so it aligns with standard 120 mm mounting holes; check that your case allows 38 mm depth.
How is the 4-wire power connector attached, and what step is often missed?
Connect the 4-wire plug to a matching 4-pin header on the motherboard or fan controller, making sure the keyed connector seats fully; the green LED draws power from the same header.
What maintenance will the 2-ball bearing need over time?
The dual ball bearing is sealed and requires no lubrication; if noise or vibration appears after long use, the fan itself would need replacement.
이 진열대의 다른 상품
고객들이 함께 비교한 상품
같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
US$0.82
0.00001048BTC
재고 있음