Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.

Uzraudzītās preces Pieteikties
5-inch IPS capacitive touch display panel with DSI ribbon cable

LORDWORLD

LORDWORLD 5inch Capacitive IPS Touch Display 800×480 DSI development board

SKU CH-M50X-YZEZK

A 5-inch capacitive IPS touch display with 800×480 resolution and DSI interface for Raspberry Pi boards

  • 5-point touch on Raspberry Pi OS, no driver needed
  • Single-touch on Ubuntu, Kali and Windows 10 IoT, driver free
  • Works with Pi 4B, 3B+, 3A+, 3B, 2B, B+, A+ and CM3/3+/4 with adapter
  • 800×480 IPS panel for clear viewing
  • Ready for Retropie projects, no driver required

5-inch Capacitive IPS Touch Display

The LORDWORLD panel is a 5-inch capacitive IPS touch display with an 800×480 resolution designed for Raspberry Pi development boards. It connects through the DSI interface and provides 5-point touch input on Raspberry Pi OS without requiring additional drivers. The board integrates directly with compatible Pi models for embedded projects.

Makers needing driver-free multi-touch on Pi OS.

This display suits makers building Raspberry Pi projects that need 5-point touch on Raspberry Pi OS, Ubuntu, Kali or Windows 10 IoT with single-touch fallback. It also works with RetroPie for gaming handhelds. Builders using hosts without a DSI connector or requiring touch on unsupported operating systems should look at alternative display solutions.

DSI-connected display for Pi builds.

The panel attaches to the Raspberry Pi DSI port, leaving USB ports and GPIO pins free for other peripherals. Compatible models include Pi 4B, 3B+, 3A+, 3B, 2B, B+, A+ and Compute Modules 3, 3+ and 4 when used with the required extra adapter board. No separate driver installation is needed for supported operating systems.

Priekšrocības

  • 5-point touch on Raspberry Pi OS, no driver needed
  • Single-touch on Ubuntu, Kali and Windows 10 IoT, driver free
  • Works with Pi 4B, 3B+, 3A+, 3B, 2B, B+, A+ and CM3/3+/4 with adapter
  • 800×480 IPS panel for clear viewing
  • Ready for Retropie projects, no driver required

Specifikācijas

BrandLORDWORLD

Jautājumi par šo preci

Which Raspberry Pi models can I connect this 800×480 DSI display to without an extra adapter?

Pi 4B, 3B+, 3A+, 3B, 2B, B+ and A+ connect directly; CM3, CM3+ and CM4 need an additional adapter board.

What touch capability does this panel provide when running Ubuntu, Kali or WIN10 IoT?

Single-point touch works driver-free on those operating systems.

How can I verify the 5-point touch is active after booting Raspberry Pi OS?

Open a multi-touch test or drag five fingers simultaneously — all contact points should register on the 800×480 IPS panel.

Arī šajā sadaļā

Klienti arī salīdzināja

Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.