SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
US$391.99
0.00501696BTC
現貨
LORDWORLD
LORDWORLD 5inch Capacitive IPS Touch Display 800×480 DSI development board
A 5-inch capacitive IPS touch display with 800×480 resolution and DSI interface for Raspberry Pi boards
- 5-point touch on Raspberry Pi OS, no driver needed
- Single-touch on Ubuntu, Kali and Windows 10 IoT, driver free
- Works with Pi 4B, 3B+, 3A+, 3B, 2B, B+, A+ and CM3/3+/4 with adapter
- 800×480 IPS panel for clear viewing
- Ready for Retropie projects, no driver required
5-inch Capacitive IPS Touch Display
The LORDWORLD panel is a 5-inch capacitive IPS touch display with an 800×480 resolution designed for Raspberry Pi development boards. It connects through the DSI interface and provides 5-point touch input on Raspberry Pi OS without requiring additional drivers. The board integrates directly with compatible Pi models for embedded projects.
Makers needing driver-free multi-touch on Pi OS.
This display suits makers building Raspberry Pi projects that need 5-point touch on Raspberry Pi OS, Ubuntu, Kali or Windows 10 IoT with single-touch fallback. It also works with RetroPie for gaming handhelds. Builders using hosts without a DSI connector or requiring touch on unsupported operating systems should look at alternative display solutions.
DSI-connected display for Pi builds.
The panel attaches to the Raspberry Pi DSI port, leaving USB ports and GPIO pins free for other peripherals. Compatible models include Pi 4B, 3B+, 3A+, 3B, 2B, B+, A+ and Compute Modules 3, 3+ and 4 when used with the required extra adapter board. No separate driver installation is needed for supported operating systems.
商品特色
- 5-point touch on Raspberry Pi OS, no driver needed
- Single-touch on Ubuntu, Kali and Windows 10 IoT, driver free
- Works with Pi 4B, 3B+, 3A+, 3B, 2B, B+, A+ and CM3/3+/4 with adapter
- 800×480 IPS panel for clear viewing
- Ready for Retropie projects, no driver required
商品規格
| Brand | LORDWORLD |
|---|
商品問答
Which Raspberry Pi models can I connect this 800×480 DSI display to without an extra adapter?
Pi 4B, 3B+, 3A+, 3B, 2B, B+ and A+ connect directly; CM3, CM3+ and CM4 need an additional adapter board.
What touch capability does this panel provide when running Ubuntu, Kali or WIN10 IoT?
Single-point touch works driver-free on those operating systems.
How can I verify the 5-point touch is active after booting Raspberry Pi OS?
Open a multi-touch test or drag five fingers simultaneously — all contact points should register on the 800×480 IPS panel.
同類商品
顧客也比較過
同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。
