Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
5-inch IPS capacitive touch display panel with DSI ribbon cable

LORDWORLD

LORDWORLD 5inch Capacitive IPS Touch Display 800×480 DSI development board

SKU CH-M50X-YZEZK

A 5-inch capacitive IPS touch display with 800×480 resolution and DSI interface for Raspberry Pi boards

  • 5-point touch on Raspberry Pi OS, no driver needed
  • Single-touch on Ubuntu, Kali and Windows 10 IoT, driver free
  • Works with Pi 4B, 3B+, 3A+, 3B, 2B, B+, A+ and CM3/3+/4 with adapter
  • 800×480 IPS panel for clear viewing
  • Ready for Retropie projects, no driver required

5-inch Capacitive IPS Touch Display

The LORDWORLD panel is a 5-inch capacitive IPS touch display with an 800×480 resolution designed for Raspberry Pi development boards. It connects through the DSI interface and provides 5-point touch input on Raspberry Pi OS without requiring additional drivers. The board integrates directly with compatible Pi models for embedded projects.

Makers needing driver-free multi-touch on Pi OS.

This display suits makers building Raspberry Pi projects that need 5-point touch on Raspberry Pi OS, Ubuntu, Kali or Windows 10 IoT with single-touch fallback. It also works with RetroPie for gaming handhelds. Builders using hosts without a DSI connector or requiring touch on unsupported operating systems should look at alternative display solutions.

DSI-connected display for Pi builds.

The panel attaches to the Raspberry Pi DSI port, leaving USB ports and GPIO pins free for other peripherals. Compatible models include Pi 4B, 3B+, 3A+, 3B, 2B, B+, A+ and Compute Modules 3, 3+ and 4 when used with the required extra adapter board. No separate driver installation is needed for supported operating systems.

Kohokohdat

  • 5-point touch on Raspberry Pi OS, no driver needed
  • Single-touch on Ubuntu, Kali and Windows 10 IoT, driver free
  • Works with Pi 4B, 3B+, 3A+, 3B, 2B, B+, A+ and CM3/3+/4 with adapter
  • 800×480 IPS panel for clear viewing
  • Ready for Retropie projects, no driver required

Tekniset tiedot

BrandLORDWORLD

Kysymyksiä tästä tuotteesta

Which Raspberry Pi models can I connect this 800×480 DSI display to without an extra adapter?

Pi 4B, 3B+, 3A+, 3B, 2B, B+ and A+ connect directly; CM3, CM3+ and CM4 need an additional adapter board.

What touch capability does this panel provide when running Ubuntu, Kali or WIN10 IoT?

Single-point touch works driver-free on those operating systems.

How can I verify the 5-point touch is active after booting Raspberry Pi OS?

Open a multi-touch test or drag five fingers simultaneously — all contact points should register on the 800×480 IPS panel.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.