نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
5-inch IPS capacitive touch display panel with DSI ribbon cable

LORDWORLD

LORDWORLD 5inch Capacitive IPS Touch Display 800×480 DSI development board

SKU CH-M50X-YZEZK

A 5-inch capacitive IPS touch display with 800×480 resolution and DSI interface for Raspberry Pi boards

  • 5-point touch on Raspberry Pi OS, no driver needed
  • Single-touch on Ubuntu, Kali and Windows 10 IoT, driver free
  • Works with Pi 4B, 3B+, 3A+, 3B, 2B, B+, A+ and CM3/3+/4 with adapter
  • 800×480 IPS panel for clear viewing
  • Ready for Retropie projects, no driver required

5-inch Capacitive IPS Touch Display

The LORDWORLD panel is a 5-inch capacitive IPS touch display with an 800×480 resolution designed for Raspberry Pi development boards. It connects through the DSI interface and provides 5-point touch input on Raspberry Pi OS without requiring additional drivers. The board integrates directly with compatible Pi models for embedded projects.

Makers needing driver-free multi-touch on Pi OS.

This display suits makers building Raspberry Pi projects that need 5-point touch on Raspberry Pi OS, Ubuntu, Kali or Windows 10 IoT with single-touch fallback. It also works with RetroPie for gaming handhelds. Builders using hosts without a DSI connector or requiring touch on unsupported operating systems should look at alternative display solutions.

DSI-connected display for Pi builds.

The panel attaches to the Raspberry Pi DSI port, leaving USB ports and GPIO pins free for other peripherals. Compatible models include Pi 4B, 3B+, 3A+, 3B, 2B, B+, A+ and Compute Modules 3, 3+ and 4 when used with the required extra adapter board. No separate driver installation is needed for supported operating systems.

أبرز المميزات

  • 5-point touch on Raspberry Pi OS, no driver needed
  • Single-touch on Ubuntu, Kali and Windows 10 IoT, driver free
  • Works with Pi 4B, 3B+, 3A+, 3B, 2B, B+, A+ and CM3/3+/4 with adapter
  • 800×480 IPS panel for clear viewing
  • Ready for Retropie projects, no driver required

المواصفات

BrandLORDWORLD

أسئلة حول هذا المنتج

Which Raspberry Pi models can I connect this 800×480 DSI display to without an extra adapter?

Pi 4B, 3B+, 3A+, 3B, 2B, B+ and A+ connect directly; CM3, CM3+ and CM4 need an additional adapter board.

What touch capability does this panel provide when running Ubuntu, Kali or WIN10 IoT?

Single-point touch works driver-free on those operating systems.

How can I verify the 5-point touch is active after booting Raspberry Pi OS?

Open a multi-touch test or drag five fingers simultaneously — all contact points should register on the 800×480 IPS panel.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.