暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
5-inch IPS capacitive touch display panel with DSI ribbon cable

LORDWORLD

LORDWORLD 5inch Capacitive IPS Touch Display 800×480 DSI development board

SKU CH-M50X-YZEZK

A 5-inch capacitive IPS touch display with 800×480 resolution and DSI interface for Raspberry Pi boards

  • 5-point touch on Raspberry Pi OS, no driver needed
  • Single-touch on Ubuntu, Kali and Windows 10 IoT, driver free
  • Works with Pi 4B, 3B+, 3A+, 3B, 2B, B+, A+ and CM3/3+/4 with adapter
  • 800×480 IPS panel for clear viewing
  • Ready for Retropie projects, no driver required

5-inch Capacitive IPS Touch Display

The LORDWORLD panel is a 5-inch capacitive IPS touch display with an 800×480 resolution designed for Raspberry Pi development boards. It connects through the DSI interface and provides 5-point touch input on Raspberry Pi OS without requiring additional drivers. The board integrates directly with compatible Pi models for embedded projects.

Makers needing driver-free multi-touch on Pi OS.

This display suits makers building Raspberry Pi projects that need 5-point touch on Raspberry Pi OS, Ubuntu, Kali or Windows 10 IoT with single-touch fallback. It also works with RetroPie for gaming handhelds. Builders using hosts without a DSI connector or requiring touch on unsupported operating systems should look at alternative display solutions.

DSI-connected display for Pi builds.

The panel attaches to the Raspberry Pi DSI port, leaving USB ports and GPIO pins free for other peripherals. Compatible models include Pi 4B, 3B+, 3A+, 3B, 2B, B+, A+ and Compute Modules 3, 3+ and 4 when used with the required extra adapter board. No separate driver installation is needed for supported operating systems.

特長

  • 5-point touch on Raspberry Pi OS, no driver needed
  • Single-touch on Ubuntu, Kali and Windows 10 IoT, driver free
  • Works with Pi 4B, 3B+, 3A+, 3B, 2B, B+, A+ and CM3/3+/4 with adapter
  • 800×480 IPS panel for clear viewing
  • Ready for Retropie projects, no driver required

仕様

BrandLORDWORLD

この商品に関する質問

Which Raspberry Pi models can I connect this 800×480 DSI display to without an extra adapter?

Pi 4B, 3B+, 3A+, 3B, 2B, B+ and A+ connect directly; CM3, CM3+ and CM4 need an additional adapter board.

What touch capability does this panel provide when running Ubuntu, Kali or WIN10 IoT?

Single-point touch works driver-free on those operating systems.

How can I verify the 5-point touch is active after booting Raspberry Pi OS?

Open a multi-touch test or drag five fingers simultaneously — all contact points should register on the 800×480 IPS panel.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。