Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
5-inch IPS capacitive touch display panel with DSI ribbon cable

LORDWORLD

LORDWORLD 5inch Capacitive IPS Touch Display 800×480 DSI development board

SKU CH-M50X-YZEZK

A 5-inch capacitive IPS touch display with 800×480 resolution and DSI interface for Raspberry Pi boards

  • 5-point touch on Raspberry Pi OS, no driver needed
  • Single-touch on Ubuntu, Kali and Windows 10 IoT, driver free
  • Works with Pi 4B, 3B+, 3A+, 3B, 2B, B+, A+ and CM3/3+/4 with adapter
  • 800×480 IPS panel for clear viewing
  • Ready for Retropie projects, no driver required

5-inch Capacitive IPS Touch Display

The LORDWORLD panel is a 5-inch capacitive IPS touch display with an 800×480 resolution designed for Raspberry Pi development boards. It connects through the DSI interface and provides 5-point touch input on Raspberry Pi OS without requiring additional drivers. The board integrates directly with compatible Pi models for embedded projects.

Makers needing driver-free multi-touch on Pi OS.

This display suits makers building Raspberry Pi projects that need 5-point touch on Raspberry Pi OS, Ubuntu, Kali or Windows 10 IoT with single-touch fallback. It also works with RetroPie for gaming handhelds. Builders using hosts without a DSI connector or requiring touch on unsupported operating systems should look at alternative display solutions.

DSI-connected display for Pi builds.

The panel attaches to the Raspberry Pi DSI port, leaving USB ports and GPIO pins free for other peripherals. Compatible models include Pi 4B, 3B+, 3A+, 3B, 2B, B+, A+ and Compute Modules 3, 3+ and 4 when used with the required extra adapter board. No separate driver installation is needed for supported operating systems.

Pluspunten

  • 5-point touch on Raspberry Pi OS, no driver needed
  • Single-touch on Ubuntu, Kali and Windows 10 IoT, driver free
  • Works with Pi 4B, 3B+, 3A+, 3B, 2B, B+, A+ and CM3/3+/4 with adapter
  • 800×480 IPS panel for clear viewing
  • Ready for Retropie projects, no driver required

Specificaties

BrandLORDWORLD

Vragen over dit artikel

Which Raspberry Pi models can I connect this 800×480 DSI display to without an extra adapter?

Pi 4B, 3B+, 3A+, 3B, 2B, B+ and A+ connect directly; CM3, CM3+ and CM4 need an additional adapter board.

What touch capability does this panel provide when running Ubuntu, Kali or WIN10 IoT?

Single-point touch works driver-free on those operating systems.

How can I verify the 5-point touch is active after booting Raspberry Pi OS?

Open a multi-touch test or drag five fingers simultaneously — all contact points should register on the 800×480 IPS panel.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.