A-Tech
A-Tech 16GB DDR4 2400MHz ECC RDIMM 2Rx8 Server RAM
16GB DDR4 2400MHz ECC registered server memory module with CL17 latency and 1.2V operation
- Capacity16GB
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Voltage1.20V
- ECCYes
- Buffered/RegisteredRegistered
- 16GB DDR4 2400MHz ECC RDIMM expands server capacity
- CL17 latency and 1.20V voltage deliver stable registered performance
- 2Rx8 dual-rank organisation increases memory density per slot
- 288-pin DDR4 DIMM form factor fits standard server motherboards
- Quality-assured testing ensures dependable operation in workloads
16GB DDR4 ECC RDIMM for servers
This 16GB DDR4 2400MHz ECC registered DIMM targets administrators upgrading compatible server or workstation platforms. The module uses a 2Rx8 organisation and operates at the standard 1.2V DDR4 voltage. It serves as a direct replacement for the Kingston KTD-PE424D8/16G part number.
Sustained workload behaviour
ECC circuitry corrects single-bit errors on the fly, preventing data corruption during long compute jobs or virtualization sessions. Registered buffering reduces electrical load on the memory controller, helping signal integrity when multiple modules populate a channel. The CL17 latency and PC4-19200 rating deliver consistent throughput under continuous multi-threaded demand.
Installation notes
The 288-pin DIMM keying matches standard DDR4 server slots; the 262-pin reference in some documents is a typo and does not affect fitment. Verify that your platform supports registered ECC memory and the 2400MHz speed before purchase, as consumer desktop boards typically reject registered modules. Mixing ranks or voltages can prevent the system from posting.
Ciri-ciri utama
- 16GB DDR4 2400MHz ECC RDIMM expands server capacity
- CL17 latency and 1.20V voltage deliver stable registered performance
- 2Rx8 dual-rank organisation increases memory density per slot
- 288-pin DDR4 DIMM form factor fits standard server motherboards
- Quality-assured testing ensures dependable operation in workloads
Spesifikasi
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Kingston |
| Model | KTD-PE424D8/16G |
| Capacity | 16GB |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Features | KTD-PE424D8/16G |
Soalan tentang produk ini
How much heat and power does this 1.20V DDR4 2400MHz ECC RDIMM generate when running continuously in a server?
The module operates at the standard DDR4 voltage of 1.20V, which keeps power draw and heat output low during sustained workloads; its registered design adds a small buffering overhead but does not significantly raise thermal load compared to unbuffered DIMMs.
What motherboard slot and memory controller features are required to use this 288-pin DDR4 2400MHz ECC RDIMM?
The system must provide a DDR4 RDIMM slot with a 288-pin interface and a memory controller that supports ECC and registered modules at 2400MHz; without both ECC and registered support the stick will not function.
Will this CL17 16GB DDR4 2400MHz ECC RDIMM work alongside other DDR4 ECC RDIMMs I already have installed?
Mixing is possible when all modules are DDR4 ECC RDIMMs; the memory controller will run every stick at the lowest common speed and the loosest timings present, so the CL17 timing on this module will be respected if the existing RAM is equal or slower.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



