نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green DDR4 DIMM with black chips and silver contacts

A-Tech

A-Tech 16GB DDR4 2400MHz ECC RDIMM 2Rx8 Server RAM

SKU CH-HGTE-JT2WE

16GB DDR4 2400MHz ECC registered server memory module with CL17 latency and 1.2V operation

  • Capacity16GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 16GB DDR4 2400MHz ECC RDIMM expands server capacity
  • CL17 latency and 1.20V voltage deliver stable registered performance
  • 2Rx8 dual-rank organisation increases memory density per slot
  • 288-pin DDR4 DIMM form factor fits standard server motherboards
  • Quality-assured testing ensures dependable operation in workloads

16GB DDR4 ECC RDIMM for servers

This 16GB DDR4 2400MHz ECC registered DIMM targets administrators upgrading compatible server or workstation platforms. The module uses a 2Rx8 organisation and operates at the standard 1.2V DDR4 voltage. It serves as a direct replacement for the Kingston KTD-PE424D8/16G part number.

Sustained workload behaviour

ECC circuitry corrects single-bit errors on the fly, preventing data corruption during long compute jobs or virtualization sessions. Registered buffering reduces electrical load on the memory controller, helping signal integrity when multiple modules populate a channel. The CL17 latency and PC4-19200 rating deliver consistent throughput under continuous multi-threaded demand.

Installation notes

The 288-pin DIMM keying matches standard DDR4 server slots; the 262-pin reference in some documents is a typo and does not affect fitment. Verify that your platform supports registered ECC memory and the 2400MHz speed before purchase, as consumer desktop boards typically reject registered modules. Mixing ranks or voltages can prevent the system from posting.

أبرز المميزات

  • 16GB DDR4 2400MHz ECC RDIMM expands server capacity
  • CL17 latency and 1.20V voltage deliver stable registered performance
  • 2Rx8 dual-rank organisation increases memory density per slot
  • 288-pin DDR4 DIMM form factor fits standard server motherboards
  • Quality-assured testing ensures dependable operation in workloads

المواصفات

BrandA-Tech
SeriesCompatible Replacement for Kingston
ModelKTD-PE424D8/16G
Capacity16GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesKTD-PE424D8/16G

أسئلة حول هذا المنتج

How much heat and power does this 1.20V DDR4 2400MHz ECC RDIMM generate when running continuously in a server?

The module operates at the standard DDR4 voltage of 1.20V, which keeps power draw and heat output low during sustained workloads; its registered design adds a small buffering overhead but does not significantly raise thermal load compared to unbuffered DIMMs.

What motherboard slot and memory controller features are required to use this 288-pin DDR4 2400MHz ECC RDIMM?

The system must provide a DDR4 RDIMM slot with a 288-pin interface and a memory controller that supports ECC and registered modules at 2400MHz; without both ECC and registered support the stick will not function.

Will this CL17 16GB DDR4 2400MHz ECC RDIMM work alongside other DDR4 ECC RDIMMs I already have installed?

Mixing is possible when all modules are DDR4 ECC RDIMMs; the memory controller will run every stick at the lowest common speed and the loosest timings present, so the CL17 timing on this module will be respected if the existing RAM is equal or slower.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.