A-Tech
A-Tech 8GB DDR3L 1600 ECC RDIMM 2Rx4 server RAM
8GB DDR3L 1600 ECC RDIMM 2Rx4 at 1.35V for server and workstation upgrades
- Capacity8GB
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Voltage1.35V
- ECCYes
- Buffered/RegisteredRegistered
- 8GB capacity expands server multitasking headroom
- DDR3L 1600MHz speed accelerates data throughput
- ECC registered design protects critical workload integrity
- 35V low voltage reduces platform power draw
- 240-pin DIMM fits standard DDR3L server slots
A-Tech 8GB DDR3L 1600 ECC RDIMM 2Rx4
This 8GB DDR3L 1600 module is a registered ECC DIMM built for server and workstation systems that require error-correcting memory. It runs at 1.35V low voltage with CL11 latency and a 2Rx4 organisation. The 240-pin form factor fits standard DDR3 server slots.
Suits maintainers replacing Hynix HMT31GR7CFR4A-PB
Administrators upgrading compatible platforms with validated DDR3L registered ECC memory will find this a direct match. Systems that need unbuffered DIMMs, higher frequencies, or non-ECC modules cannot use this part.
Registered ECC with 2Rx4 organisation
The module combines ECC error correction and register buffering in a dual-rank x4 configuration. This specific organisation is required by many server memory controllers for stable operation at full population.
Ciri-ciri utama
- 8GB capacity expands server multitasking headroom
- DDR3L 1600MHz speed accelerates data throughput
- ECC registered design protects critical workload integrity
- 35V low voltage reduces platform power draw
- 240-pin DIMM fits standard DDR3L server slots
Spesifikasi
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Features | Major Brand Chips |
Soalan tentang produk ini
Does the CL11 latency at 1600 MHz create a bottleneck during sustained server workloads?
CL11 is the rated latency for this DDR3L 1600 module; the registered buffer and ECC logic add a cycle, but the limit under sustained use is the memory controller's maximum supported frequency and rank population rules, not the CAS figure alone.
How much heat and power does an 8 GB 1.35 V registered DIMM produce when running 24/7?
At 1.35 V the DDR3L module draws less power than standard 1.5 V DDR3, reducing heat output; the registered driver adds slight consumption, but total thermal load stays within normal server DIMM limits for continuous operation.
What motherboard slot and chipset support are required for this 240-pin DDR3L ECC RDIMM to function?
A 240-pin DDR3 DIMM slot wired for registered ECC memory and a chipset or CPU memory controller that validates DDR3L 1.35 V 2Rx4 modules are required; consumer boards without registered-ECC support will not post.
Juga di rak ini
Pelanggan turut membandingkan
Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.



