Kami menerima kripto — jadi koin yang anda simpan boleh membeli perkakasan sebenar.Bayar dengan kripto, belanjakannya untuk perkakasan sebenar. Penghantaran berinsurans percuma ke seluruh dunia untuk belian melebihi USD 399. Kotak biasa tanpa jenama, dihantar dari Jerman.Penghantaran berinsurans percuma untuk belian melebihi USD 399. Kadar anda dikunci selama 30 minit sebaik sahaja proses pesanan bermula.Kadar dikunci selama 30 minit. Setiap item disegel, nombor sirinya disemak, dan dilindungi waranti 24 bulan.Disegel, waranti 24 bulan.

Barang disimpan Log masuk
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX HC-1521 memory upgrade

SKU CH-VFT9-RHARG

A 4 GB DDR3 SODIMM running at 1333 MHz with CL9 latency, built for the POSIFLEX HC-1521 21.5" terminal

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX HC-1521 terminal
  • DDR3 1333 speed with CL9 latency
  • Low 1.35V voltage reduces power draw
  • 4GB capacity in single 204-pin SODIMM
  • Rigorously stress tested for reliability

POSIFLEX HC-1521 memory upgrade

This 4 GB DDR3 SODIMM is built for the POSIFLEX HC-1521 21.5 inch touch terminal. It uses a 204-pin form factor and runs at 1333 MHz with CL9 latency. The module is unbuffered and non-ECC, matching the original system specification.

Sustained workload stability

Each module is stress tested under load before shipment to verify reliable operation in continuous point-of-sale environments. The 1.35 V operating voltage helps limit heat during long shifts. Major-brand DRAM from Samsung, Micron or Hynix provides consistent timing across extended use.

Pre-installation checks

Confirm the terminal accepts a single 2Rx8 4 GB SODIMM and that the memory slot is keyed for 204-pin DDR3. Verify the system BIOS recognises PC3-10600 speed without requiring a voltage change to 1.50 V. Ensure no larger capacity or ECC module is already installed in the second slot.

Ciri-ciri utama

  • Designed for POSIFLEX HC-1521 terminal
  • DDR3 1333 speed with CL9 latency
  • Low 1.35V voltage reduces power draw
  • 4GB capacity in single 204-pin SODIMM
  • Rigorously stress tested for reliability

Spesifikasi

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Soalan tentang produk ini

How much power does the 1.35 V DDR3 SODIMM draw when the POSIFLEX HC-1521 runs continuously?

The module operates at 1.35 V, which is lower than standard 1.50 V DDR3, reducing power draw and heat during all-day operation in the 21.5" terminal.

What must the POSIFLEX HC-1521 already have for this 204-pin SODIMM to work?

An available 204-pin DDR3 SODIMM slot that accepts 1.35 V non-ECC unbuffered modules at 1333 MHz.

Will this 4 GB PC3-10600 module run alongside the original memory in my HC-1521?

Yes, it is compatible with the POSIFLEX HC-1521 and will operate at 1333 MHz CL9 alongside existing DDR3 SODIMMs of the same voltage and type.

Juga di rak ini

Pelanggan turut membandingkan

Rak yang sama, checkout yang sama — lapan koin kripto dan kunci kadar 30 minit.