Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX HC-1521 memory upgrade

SKU CH-VFT9-RHARG

A 4 GB DDR3 SODIMM running at 1333 MHz with CL9 latency, built for the POSIFLEX HC-1521 21.5" terminal

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX HC-1521 terminal
  • DDR3 1333 speed with CL9 latency
  • Low 1.35V voltage reduces power draw
  • 4GB capacity in single 204-pin SODIMM
  • Rigorously stress tested for reliability

POSIFLEX HC-1521 memory upgrade

This 4 GB DDR3 SODIMM is built for the POSIFLEX HC-1521 21.5 inch touch terminal. It uses a 204-pin form factor and runs at 1333 MHz with CL9 latency. The module is unbuffered and non-ECC, matching the original system specification.

Sustained workload stability

Each module is stress tested under load before shipment to verify reliable operation in continuous point-of-sale environments. The 1.35 V operating voltage helps limit heat during long shifts. Major-brand DRAM from Samsung, Micron or Hynix provides consistent timing across extended use.

Pre-installation checks

Confirm the terminal accepts a single 2Rx8 4 GB SODIMM and that the memory slot is keyed for 204-pin DDR3. Verify the system BIOS recognises PC3-10600 speed without requiring a voltage change to 1.50 V. Ensure no larger capacity or ECC module is already installed in the second slot.

Punti di forza

  • Designed for POSIFLEX HC-1521 terminal
  • DDR3 1333 speed with CL9 latency
  • Low 1.35V voltage reduces power draw
  • 4GB capacity in single 204-pin SODIMM
  • Rigorously stress tested for reliability

Caratteristiche tecniche

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Domande su questo articolo

How much power does the 1.35 V DDR3 SODIMM draw when the POSIFLEX HC-1521 runs continuously?

The module operates at 1.35 V, which is lower than standard 1.50 V DDR3, reducing power draw and heat during all-day operation in the 21.5" terminal.

What must the POSIFLEX HC-1521 already have for this 204-pin SODIMM to work?

An available 204-pin DDR3 SODIMM slot that accepts 1.35 V non-ECC unbuffered modules at 1333 MHz.

Will this 4 GB PC3-10600 module run alongside the original memory in my HC-1521?

Yes, it is compatible with the POSIFLEX HC-1521 and will operate at 1333 MHz CL9 alongside existing DDR3 SODIMMs of the same voltage and type.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.