我們接受加密貨幣付款 — 讓您持有的幣種也能買到真正的硬體設備。以加密貨幣付款，直接購入真正的硬體設備。 全球訂單滿 US$399，即享免費保險運送。簡約外箱，不印任何品牌標誌，從德國出貨。訂單滿 US$399，即享免費保險運送。 結帳一開始，您的匯率即鎖定 30 分鐘。匯率鎖定 30 分鐘。 每件商品皆原廠密封、序號經過核對，並享有 24 個月保固。原廠密封，保固 24 個月。

追蹤清單 登入
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX HC-1521 memory upgrade

SKU CH-VFT9-RHARG

A 4 GB DDR3 SODIMM running at 1333 MHz with CL9 latency, built for the POSIFLEX HC-1521 21.5" terminal

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX HC-1521 terminal
  • DDR3 1333 speed with CL9 latency
  • Low 1.35V voltage reduces power draw
  • 4GB capacity in single 204-pin SODIMM
  • Rigorously stress tested for reliability

POSIFLEX HC-1521 memory upgrade

This 4 GB DDR3 SODIMM is built for the POSIFLEX HC-1521 21.5 inch touch terminal. It uses a 204-pin form factor and runs at 1333 MHz with CL9 latency. The module is unbuffered and non-ECC, matching the original system specification.

Sustained workload stability

Each module is stress tested under load before shipment to verify reliable operation in continuous point-of-sale environments. The 1.35 V operating voltage helps limit heat during long shifts. Major-brand DRAM from Samsung, Micron or Hynix provides consistent timing across extended use.

Pre-installation checks

Confirm the terminal accepts a single 2Rx8 4 GB SODIMM and that the memory slot is keyed for 204-pin DDR3. Verify the system BIOS recognises PC3-10600 speed without requiring a voltage change to 1.50 V. Ensure no larger capacity or ECC module is already installed in the second slot.

商品特色

  • Designed for POSIFLEX HC-1521 terminal
  • DDR3 1333 speed with CL9 latency
  • Low 1.35V voltage reduces power draw
  • 4GB capacity in single 204-pin SODIMM
  • Rigorously stress tested for reliability

商品規格

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

商品問答

How much power does the 1.35 V DDR3 SODIMM draw when the POSIFLEX HC-1521 runs continuously?

The module operates at 1.35 V, which is lower than standard 1.50 V DDR3, reducing power draw and heat during all-day operation in the 21.5" terminal.

What must the POSIFLEX HC-1521 already have for this 204-pin SODIMM to work?

An available 204-pin DDR3 SODIMM slot that accepts 1.35 V non-ECC unbuffered modules at 1333 MHz.

Will this 4 GB PC3-10600 module run alongside the original memory in my HC-1521?

Yes, it is compatible with the POSIFLEX HC-1521 and will operate at 1333 MHz CL9 alongside existing DDR3 SODIMMs of the same voltage and type.

同類商品

顧客也比較過

同一分類，同一套結帳流程 — 支援八種加密貨幣，匯率鎖定 30 分鐘。