Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX HC-1521 memory upgrade

SKU CH-VFT9-RHARG

A 4 GB DDR3 SODIMM running at 1333 MHz with CL9 latency, built for the POSIFLEX HC-1521 21.5" terminal

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX HC-1521 terminal
  • DDR3 1333 speed with CL9 latency
  • Low 1.35V voltage reduces power draw
  • 4GB capacity in single 204-pin SODIMM
  • Rigorously stress tested for reliability

POSIFLEX HC-1521 memory upgrade

This 4 GB DDR3 SODIMM is built for the POSIFLEX HC-1521 21.5 inch touch terminal. It uses a 204-pin form factor and runs at 1333 MHz with CL9 latency. The module is unbuffered and non-ECC, matching the original system specification.

Sustained workload stability

Each module is stress tested under load before shipment to verify reliable operation in continuous point-of-sale environments. The 1.35 V operating voltage helps limit heat during long shifts. Major-brand DRAM from Samsung, Micron or Hynix provides consistent timing across extended use.

Pre-installation checks

Confirm the terminal accepts a single 2Rx8 4 GB SODIMM and that the memory slot is keyed for 204-pin DDR3. Verify the system BIOS recognises PC3-10600 speed without requiring a voltage change to 1.50 V. Ensure no larger capacity or ECC module is already installed in the second slot.

Prednosti

  • Designed for POSIFLEX HC-1521 terminal
  • DDR3 1333 speed with CL9 latency
  • Low 1.35V voltage reduces power draw
  • 4GB capacity in single 204-pin SODIMM
  • Rigorously stress tested for reliability

Špecifikácie

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Otázky k tomuto produktu

How much power does the 1.35 V DDR3 SODIMM draw when the POSIFLEX HC-1521 runs continuously?

The module operates at 1.35 V, which is lower than standard 1.50 V DDR3, reducing power draw and heat during all-day operation in the 21.5" terminal.

What must the POSIFLEX HC-1521 already have for this 204-pin SODIMM to work?

An available 204-pin DDR3 SODIMM slot that accepts 1.35 V non-ECC unbuffered modules at 1333 MHz.

Will this 4 GB PC3-10600 module run alongside the original memory in my HC-1521?

Yes, it is compatible with the POSIFLEX HC-1521 and will operate at 1333 MHz CL9 alongside existing DDR3 SODIMMs of the same voltage and type.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.