BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
US$ 214,99
0.00277553BTC
Op voorraad
NEMIX RAM
NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX HC-1521 memory upgrade
A 4 GB DDR3 SODIMM running at 1333 MHz with CL9 latency, built for the POSIFLEX HC-1521 21.5" terminal
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- Designed for POSIFLEX HC-1521 terminal
- DDR3 1333 speed with CL9 latency
- Low 1.35V voltage reduces power draw
- 4GB capacity in single 204-pin SODIMM
- Rigorously stress tested for reliability
POSIFLEX HC-1521 memory upgrade
This 4 GB DDR3 SODIMM is built for the POSIFLEX HC-1521 21.5 inch touch terminal. It uses a 204-pin form factor and runs at 1333 MHz with CL9 latency. The module is unbuffered and non-ECC, matching the original system specification.
Sustained workload stability
Each module is stress tested under load before shipment to verify reliable operation in continuous point-of-sale environments. The 1.35 V operating voltage helps limit heat during long shifts. Major-brand DRAM from Samsung, Micron or Hynix provides consistent timing across extended use.
Pre-installation checks
Confirm the terminal accepts a single 2Rx8 4 GB SODIMM and that the memory slot is keyed for 204-pin DDR3. Verify the system BIOS recognises PC3-10600 speed without requiring a voltage change to 1.50 V. Ensure no larger capacity or ECC module is already installed in the second slot.
Pluspunten
- Designed for POSIFLEX HC-1521 terminal
- DDR3 1333 speed with CL9 latency
- Low 1.35V voltage reduces power draw
- 4GB capacity in single 204-pin SODIMM
- Rigorously stress tested for reliability
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K1 |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Vragen over dit artikel
How much power does the 1.35 V DDR3 SODIMM draw when the POSIFLEX HC-1521 runs continuously?
The module operates at 1.35 V, which is lower than standard 1.50 V DDR3, reducing power draw and heat during all-day operation in the 21.5" terminal.
What must the POSIFLEX HC-1521 already have for this 204-pin SODIMM to work?
An available 204-pin DDR3 SODIMM slot that accepts 1.35 V non-ECC unbuffered modules at 1333 MHz.
Will this 4 GB PC3-10600 module run alongside the original memory in my HC-1521?
Yes, it is compatible with the POSIFLEX HC-1521 and will operate at 1333 MHz CL9 alongside existing DDR3 SODIMMs of the same voltage and type.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
US$ 216,99
0.00280135BTC
Op voorraad
