A-Tech 16GB DDR4 3200 ECC RDIMM 1Rx8 CL22 1.2V 288-Pin Server RAM
- 16GB
- 288-Pin DDR4 SDRAM
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
A-Tech
A 32 GB dual-channel kit of DDR4 2933 ECC registered DIMMs for servers and workstations
Capacity 32GB (2 x 16GB)
This A-Tech kit provides 32GB of DDR4 ECC registered memory across two 16GB modules. It is built for servers and workstations that require error correction and registered signalling. Desktop and laptop systems cannot use these modules.
Each module runs at the standard 1.2V DDR4 voltage without a heat spreader. The single-rank 1Rx8 organisation helps keep power draw modest under typical server workloads. No active cooling is included or required by the modules themselves.
The 288-pin DIMMs install in dual-channel pairs following the system manual’s seating guidelines. Registered buffering and ECC function only on platforms designed for DDR4 RDIMM memory. Buyers who need non-ECC or unbuffered modules for consumer boards cannot use this kit.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 16GB 1Rx8 PC4-2933Y-R |
| Part Number | AT16G2D4D2933RS8N12V |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips / Error Correcting Technology for Server Systems |
Andere versies van dit model
Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.
Power off the server, open the chassis, align each module's notch with the slot key, press down until the retention clips click, then verify in BIOS that both 16GB modules are detected at 2933 MHz.
No scheduled maintenance is required; the modules have no heat spreaders or moving parts, so replacement is only necessary if a module fails or the server's maximum supported capacity is increased.
The DDR4 2933 MT/s data rate and CL21 latency set the throughput ceiling; sustained workloads will hit that bandwidth limit before the 1.20V voltage or single-rank architecture becomes a constraint.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?