A-Tech 16GB DDR4 3200 ECC RDIMM 1Rx8 CL22 1.2V 288-Pin Server RAM
- 16GB
- 288-Pin DDR4 SDRAM
Aceptamos criptomonedas — así, las criptos que usted tiene pueden comprar hardware real.Pague en cripto y gástela en hardware real. Envío asegurado gratis a nivel mundial a partir de $399. Cajas neutras, sin marca, enviadas desde Alemania.Envío asegurado gratis a partir de $399. Su cotización queda bloqueada 30 minutos en cuanto se abre el pago.Cotización bloqueada 30 minutos. Todos los artículos vienen sellados, con el número de serie verificado y cubiertos por una garantía de 24 meses.Sellado, con 24 meses de garantía.
A-Tech
A 32 GB dual-channel kit of DDR4 2933 ECC registered DIMMs for servers and workstations
Capacity 32GB (2 x 16GB)
This A-Tech kit provides 32GB of DDR4 ECC registered memory across two 16GB modules. It is built for servers and workstations that require error correction and registered signalling. Desktop and laptop systems cannot use these modules.
Each module runs at the standard 1.2V DDR4 voltage without a heat spreader. The single-rank 1Rx8 organisation helps keep power draw modest under typical server workloads. No active cooling is included or required by the modules themselves.
The 288-pin DIMMs install in dual-channel pairs following the system manual’s seating guidelines. Registered buffering and ECC function only on platforms designed for DDR4 RDIMM memory. Buyers who need non-ECC or unbuffered modules for consumer boards cannot use this kit.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 16GB 1Rx8 PC4-2933Y-R |
| Part Number | AT16G2D4D2933RS8N12V |
| Capacity | 32GB (2 x 16GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | CL21 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Multi-channel Kit | Dual Channel Kit |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips / Error Correcting Technology for Server Systems |
Otras versiones de este modelo
Misma familia, con memoria, disipador o frecuencia diferentes — compare antes de decidirse.
Power off the server, open the chassis, align each module's notch with the slot key, press down until the retention clips click, then verify in BIOS that both 16GB modules are detected at 2933 MHz.
No scheduled maintenance is required; the modules have no heat spreaders or moving parts, so replacement is only necessary if a module fails or the server's maximum supported capacity is increased.
The DDR4 2933 MT/s data rate and CL21 latency set the throughput ceiling; sustained workloads will hit that bandwidth limit before the 1.20V voltage or single-rank architecture becomes a constraint.
También en este pasillo
Mismo estante, mismo pago — ocho criptomonedas y un tipo de cambio fijado 30 minutos.
Lo que usted paga, y la moneda en la que lee los precios.
Se envía desde su billetera al finalizar la compra
Solo informativo — el catálogo está en dólares
Ninguna moneda coincide.
Elija el idioma en el que el sitio le habla.
¿Es nuevo aquí?
¿Ya tiene una?
No existe ningún restablecimiento automático: esta tienda no envía correos electrónicos, así que no hay ningún enlace de un solo uso que solicitar. Deje la dirección asociada a la cuenta y se atenderá de forma manual.
Solicitud registrada
No hay nada de camino a su bandeja de entrada: esta tienda no envía correos en absoluto. Alguien se encarga de esto manualmente.
¿La recordó?