Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 240-pin DDR3 server memory module with black chips and gold contacts

A-Tech

A-Tech 8GB DDR3 1333MHz PC3-10600 ECC RDIMM 2Rx4 for HP 501536-001 AM387A AT109A FX622AA Server Memory

SKU CH-8WJR-ZZCB8

8GB DDR3 1333MHz ECC registered DIMM for HP servers using 240-pin slots

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity supports larger server workloads
  • DDR3 1333MHz speed handles data-intensive tasks
  • ECC RDIMM registered design ensures data integrity
  • 240-pin DIMM fits compatible HP server slots
  • 5V standard voltage maintains efficient operation

8GB DDR3 ECC RDIMM for HP servers

This 8GB DDR3 1333MHz registered DIMM adds ECC-protected memory to compatible HP server and workstation platforms. It uses a 240-pin form factor and runs at the standard 1.5V voltage for DDR3 modules. The module is built as a direct replacement for HP part numbers 501536-001, AM387A, AT109A and FX622AA.

Single 8GB module with CL9 latency

The stick provides 8GB of capacity in a single rank 2Rx4 configuration with CAS latency 9. Registered buffering and ECC support allow it to operate reliably in multi-DIMM server channels where data integrity is required. Systems needing larger memory footprints will require additional modules to scale beyond this single 8GB increment.

240-pin DDR3 slot and registered memory controller

Installation demands a motherboard with DDR3 DIMM slots that accept registered ECC modules and a chipset able to drive the registered control signals. The module frees a standard DIMM slot for this capacity upgrade but cannot be used in platforms limited to unbuffered or non-ECC memory.

Pluspunten

  • 8GB capacity supports larger server workloads
  • DDR3 1333MHz speed handles data-intensive tasks
  • ECC RDIMM registered design ensures data integrity
  • 240-pin DIMM fits compatible HP server slots
  • 5V standard voltage maintains efficient operation

Specificaties

BrandA-Tech
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Vragen over dit artikel

Will this 1333 MHz DDR3 ECC RDIMM work in a server that currently uses 1333 MHz registered modules?

The module runs at DDR3 1333 MHz (PC3-10600) with CL9 latency and 1.5 V. It is a 240-pin registered DIMM, so it fits the same slots as other DDR3 RDIMMs of that speed.

How can I verify the 8 GB ECC RDIMM is detected and running correctly after installation?

Enter the server BIOS or UEFI on boot and confirm the memory size shows 8 GB, the speed reads 1333 MHz, and ECC status is reported as enabled.

Does the single 8 GB 2Rx4 DDR3 RDIMM ship alone, or are additional parts such as heat spreaders or cables included?

The package contains one 8 GB DDR3 1333 MHz ECC registered 240-pin DIMM. No heat spreaders, cables or other accessories are supplied.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.