暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Green 240-pin DDR3 server memory module with black chips and gold contacts

A-Tech

A-Tech 8GB DDR3 1333MHz PC3-10600 ECC RDIMM 2Rx4 for HP 501536-001 AM387A AT109A FX622AA Server Memory

SKU CH-8WJR-ZZCB8

8GB DDR3 1333MHz ECC registered DIMM for HP servers using 240-pin slots

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity supports larger server workloads
  • DDR3 1333MHz speed handles data-intensive tasks
  • ECC RDIMM registered design ensures data integrity
  • 240-pin DIMM fits compatible HP server slots
  • 5V standard voltage maintains efficient operation

8GB DDR3 ECC RDIMM for HP servers

This 8GB DDR3 1333MHz registered DIMM adds ECC-protected memory to compatible HP server and workstation platforms. It uses a 240-pin form factor and runs at the standard 1.5V voltage for DDR3 modules. The module is built as a direct replacement for HP part numbers 501536-001, AM387A, AT109A and FX622AA.

Single 8GB module with CL9 latency

The stick provides 8GB of capacity in a single rank 2Rx4 configuration with CAS latency 9. Registered buffering and ECC support allow it to operate reliably in multi-DIMM server channels where data integrity is required. Systems needing larger memory footprints will require additional modules to scale beyond this single 8GB increment.

240-pin DDR3 slot and registered memory controller

Installation demands a motherboard with DDR3 DIMM slots that accept registered ECC modules and a chipset able to drive the registered control signals. The module frees a standard DIMM slot for this capacity upgrade but cannot be used in platforms limited to unbuffered or non-ECC memory.

特長

  • 8GB capacity supports larger server workloads
  • DDR3 1333MHz speed handles data-intensive tasks
  • ECC RDIMM registered design ensures data integrity
  • 240-pin DIMM fits compatible HP server slots
  • 5V standard voltage maintains efficient operation

仕様

BrandA-Tech
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

この商品に関する質問

Will this 1333 MHz DDR3 ECC RDIMM work in a server that currently uses 1333 MHz registered modules?

The module runs at DDR3 1333 MHz (PC3-10600) with CL9 latency and 1.5 V. It is a 240-pin registered DIMM, so it fits the same slots as other DDR3 RDIMMs of that speed.

How can I verify the 8 GB ECC RDIMM is detected and running correctly after installation?

Enter the server BIOS or UEFI on boot and confirm the memory size shows 8 GB, the speed reads 1333 MHz, and ECC status is reported as enabled.

Does the single 8 GB 2Rx4 DDR3 RDIMM ship alone, or are additional parts such as heat spreaders or cables included?

The package contains one 8 GB DDR3 1333 MHz ECC registered 240-pin DIMM. No heat spreaders, cables or other accessories are supplied.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。