NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
A-Tech
8GB DDR3 1600MHz ECC registered DIMM, dual-rank Samsung chips, Supermicro certified
This 8GB registered DIMM uses Samsung chips and runs at DDR3 1600MHz with CL11 latency. It is certified for Supermicro systems and carries the MEM-DR380L-SL01-ER16 part number. The module is built for servers and workstations that require error-correcting registered memory.
Operating at the standard 1.5V DDR3 voltage, the module draws typical power for an 8GB registered stick. Passive cooling through the server chassis airflow keeps temperatures within normal limits. No active cooling or additional fan noise is introduced by the memory itself.
The dual-rank 2Rx4 organisation helps maintain bandwidth during extended workloads. ECC registration adds a clock cycle of buffering, which stabilises the signal under continuous read and write cycles. The module is tested for reliable operation in 24/7 server environments.
| Brand | SuperMicro |
|---|---|
| Series | Supermicro Certified |
| Model | MEM-DR380L-SL01-ER16 |
| Capacity | 8GB |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.50V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Samsung Chipset |
| Features | Supermicro Certified MEM-DR380L-SL01-ER16 (M393B1K70DH0-CK0) |
Power down the server, open the chassis, align the module key notch with the slot, press firmly until both retention clips click, then verify the system BIOS reports the full 8 GB at 1600 MHz; the step often missed is enabling ECC in the BIOS after the physical install.
No scheduled maintenance is required; the module is tested for lifetime reliability, so replacement is only needed if a memory diagnostic reports uncorrectable ECC errors or the server fails to POST with the DIMM seated.
The thermal and voltage envelope of DDR3 at 1.50 V and CL11 latency defines the sustained performance ceiling; the registered buffer adds minor latency but prevents signal degradation, so the memory controller’s maximum supported bandwidth at 1600 MHz is the limiting factor.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?