Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green printed circuit board with black memory chips and gold edge connectors, single 288-pin DIMM module

A-Tech

A-Tech 8GB DDR4 2400MHz CL17 Desktop Memory

SKU CH-MBH7-JXEDW

An 8GB DDR4 2400MHz CL17 DIMM module tested for HP desktop compatibility

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • Tested Frequency2400
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCNo
  • Boosts system responsiveness with 8GB DDR4 2400MHz capacity
  • Low 1.20V voltage reduces power draw and heat
  • CL17 latency supports smooth multitasking performance
  • 288-pin DIMM fits standard desktop motherboard slots
  • Tested compatible with HP part numbers including 900315-591

Ready to Install

This 8GB DDR4 2400MHz CL17 desktop module arrives as a single 288-pin DIMM rated at 1.20V. It is built with major-brand chips and tested at 2400 MT/s to deliver a straightforward capacity increase for everyday workloads.

Check Your System

Verify that your motherboard accepts non-ECC unbuffered DDR4 DIMMs and has a free 288-pin slot before ordering. Confirm the maximum supported frequency and whether the board can run at CL17 timings to avoid mismatched settings.

What Changes

Adding this stick raises total memory by 8GB, which reduces paging and lets you keep more applications open at once. The 1.20V operation matches standard DDR4 voltage so no manual voltage adjustment is required.

Pluspunten

  • Boosts system responsiveness with 8GB DDR4 2400MHz capacity
  • Low 1.20V voltage reduces power draw and heat
  • CL17 latency supports smooth multitasking performance
  • 288-pin DIMM fits standard desktop motherboard slots
  • Tested compatible with HP part numbers including 900315-591

Specificaties

BrandA-Tech
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
Tested Frequency2400
CAS LatencyCL17
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Vragen over dit artikel

Will this module fit my HP desktop that uses part number 900315-591?

Yes, the module is listed as a direct replacement for HP part numbers 900315-591, 854913-001, 1CA80AA, 1CA80AT, Z9H60AA and Z9H60AT.

Does my motherboard need to support 1.2 V DDR4 to use this memory?

The module operates at the standard 1.2 V DDR4 voltage, so any board that accepts DDR4 DIMMs at that voltage will run it correctly.

Can I add this single 8 GB stick alongside an existing 8 GB stick for dual-channel operation?

Dual-channel works when two identical modules are installed in the correct slots; this kit provides one 8 GB DIMM, so you would need a matching second stick.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.