Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

A-Tech

A-Tech 8GB DDR5-4800 Desktop RAM Module for Kingston KCP548US6-8

SKU CH-BCR8-VZ57T

8GB DDR5-4800 desktop module, CL40 at 1.1 V, 288-pin unbuffered non-ECC, compatible replacement for Kingston KCP548US6-8

  • Capacity8GB
  • SpeedDDR5 4800 (PC5 38400)
  • Tested Frequency4800
  • CAS Latency40
  • Voltage1.10V
  • ECCNo
  • 8GB capacity handles heavier workloads
  • DDR5 4800 speed accelerates data throughput
  • CL40 latency supports responsive operation
  • 10V voltage reduces power draw
  • 288-pin DIMM fits standard desktop slots

8GB DDR5-4800 Desktop Module

This A-Tech module delivers 8GB of DDR5 memory at 4800MHz with CAS latency 40. It operates at the standard 1.10V DDR5 voltage and uses a 288-pin unbuffered DIMM form factor. The single-rank 1Rx16 design employs major-brand DRAM ICs for dependable desktop performance.

Drop-in Kingston KCP548US6-8 replacement

The module is validated as a direct replacement for the Kingston KCP548US6-8 part number. It suits owners of that specific Kingston kit or any desktop board accepting DDR5-4800 non-ECC UDIMMs. Builders needing ECC, registered buffers, higher capacities or faster JEDEC speeds should select a different module.

Fits standard DDR5 desktop slots

Installation requires a motherboard with a DDR5 DIMM slot and a CPU memory controller that supports the 4800MT/s data rate. The low 1.10V operating voltage reduces power draw compared to previous DDR generations. No heat spreader is fitted, leaving clearance for larger CPU coolers in compact chassis.

Pluspunten

  • 8GB capacity handles heavier workloads
  • DDR5 4800 speed accelerates data throughput
  • CL40 latency supports responsive operation
  • 10V voltage reduces power draw
  • 288-pin DIMM fits standard desktop slots

Specificaties

BrandA-Tech
SeriesCompatible Replacement for Kingston KCP548US6-8
ModelA-Tech 8GB DDR5-4800 Desktop RAM Module
Capacity8GB
SpeedDDR5 4800 (PC5 38400)
Tested Frequency4800
CAS Latency40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand DRAM IC Chips
ColorGreen/Black
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips
Recommend UseCompatible Replacement for Kingston KCP548US6-8

Vragen over dit artikel

Does my motherboard need a DDR5 DIMM slot for this 288-pin module?

Yes, this is a DDR5 4800 DIMM with 288 pins and requires a motherboard that supports DDR5 memory.

Can I mix this 1Rx16 CL40 stick with older DDR5 modules running at 4800 MT/s?

It will run at the lowest common speed and timings; matching rank and CAS latency 40 gives the best stability.

How do I confirm the module is running at 4800 MT/s after installation?

Check the memory frequency in BIOS or a system utility such as CPU-Z; it should report 4800 MT/s at 1.1 V with CL40 timings.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.