Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Light brown PLA filament on a white plastic spool

BFKK

BFKK PLA 3D Printer Filament 1.75mm Wood 1kg Spool

SKU CH-Y91S-F5E9Z

Wood-coloured PLA filament on a 1 kg spool with ±0.02 mm diameter accuracy for reliable FDM printing

  • ColorWood

Color Wood

  • Wood-look prints from PLA-based filament
  • Neat winding prevents tangles and jams
  • Dimensional accuracy ±0.02 mm fits most 1.75 mm FDM printers
  • Standard spool dimensions suit common printer mounts
  • Recommended nozzle 200–230 °C, bed 50–65 °C, speed 50–100 mm/s

Wood PLA Filament 1.75 mm

This wood-coloured PLA filament is supplied on a 1 kg spool for use with FDM 3D printers. The material is intended for hobbyists and professionals who want a wood-like finish without the abrasion of composite filaments.

Printer Settings to Verify

Your printer must accept 1.75 mm filament and be able to reach a nozzle temperature of 200 to 230 °C. A heated bed capable of 50 to 65 °C is recommended, and print speeds of 50 to 100 mm/s suit the material.

Spool Dimensions and Winding

The spool measures 8.00 inches in diameter, 2.50 inches wide and has a 2.20 inch hub hole, fitting many common printer mounts. A self-developed winding process gives a 100 % neat rate that reduces tangles and jams during printing.

Pluspunten

  • Wood-look prints from PLA-based filament
  • Neat winding prevents tangles and jams
  • Dimensional accuracy ±0.02 mm fits most 1.75 mm FDM printers
  • Standard spool dimensions suit common printer mounts
  • Recommended nozzle 200–230 °C, bed 50–65 °C, speed 50–100 mm/s

Specificaties

ColorWood

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Does the box include only the 1kg wood PLA spool or are tools and adhesive also supplied?

The box contains the 1kg wood PLA filament on an 8.00" spool with a 2.20" hub hole; tools, adhesive or a dryer are not included.

Should I choose this 1.75mm wood PLA or a different diameter for my printer?

This spool is 1.75mm diameter with +/- .02mm accuracy, matching almost all FDM printers that accept 1.75mm filament; other diameters will not fit.

What do the 200-230°C nozzle and 50-65°C bed temperatures mean for everyday prints?

They are the recommended starting range: set the nozzle between 200 and 230°C and the bed between 50 and 65°C, then adjust for your specific model and cooling.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.