Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green 288-pin DDR4 server memory module with black chips and silver heat spreader

Brute Networks

Brute Networks HPE Compatible 8GB DDR4-2933 1Rx8 1.2V 288-Pin Server RAM

SKU CH-DSY2-8SH8P

8GB DDR4-2933 registered ECC server memory with 1Rx8 organisation and 1.2V operation

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered
  • HPE compatible upgrade fits existing server infrastructure
  • DDR4-2933 speed delivers 23400 MT/s data throughput
  • Registered ECC design protects data integrity
  • 20 V operation reduces power consumption
  • Major-brand Samsung, SK Hynix or Micron chips ensure reliability

HPE-compatible 8GB DDR4-2933 module

This 8GB registered ECC DDR4-2933 DIMM is built for HPE servers that require PC4-23400 memory. It targets IT teams extending the life of existing infrastructure without paying OEM list prices.

8GB single-rank capacity and headroom

The single 1Rx8 rank delivers 8GB at 1.20V, suited to standard multi-socket configurations. Workloads needing larger per-slot density or higher frequencies will exceed this module's limits.

Registered ECC thermals and power

Registered buffering and on-die ECC add minimal latency while stabilising signal integrity under load. The 1.20V operating voltage keeps power draw low in dense server chassis, and the major-brand DRAM maintains consistent thermals during sustained operation.

Pluspunten

  • HPE compatible upgrade fits existing server infrastructure
  • DDR4-2933 speed delivers 23400 MT/s data throughput
  • Registered ECC design protects data integrity
  • 20 V operation reduces power consumption
  • Major-brand Samsung, SK Hynix or Micron chips ensure reliability

Specificaties

BrandHPE
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor Brand Chipset

Vragen over dit artikel

Will this 8GB DDR4-2933 registered ECC module operate alongside existing DDR4 modules in my HPE server?

The module runs at DDR4-2933 (PC4-23400) with 1.20 V, registered ECC, 1Rx8 organisation and 288-pin form factor; when mixed, all DIMMs will run at the speed of the slowest installed module.

How can I confirm the module is recognised and running at the correct speed after installation?

Check the server BIOS or iLO interface — it should show 8 GB, DDR4-2933, registered ECC, 1Rx8 and 1.20 V for the new DIMM.

What ships with the module and is anything else required for installation?

Only the 288-pin DDR4 SDRAM module is supplied; no extra cables, brackets or software are needed — just an available DDR4 DIMM slot.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.