Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

Computer Memory Solutions

Computer Memory Solutions CM512642400DIMM 4GB DDR4 2400MHz CL17 ECC memory upgrade

SKU CH-AWSR-AQX72

4GB DDR4 2400MHz CL17 unbuffered DIMM upgrade for HP Z238 and Z240 workstations

  • Capacity4GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Timing17-17-17
  • Voltage1.2V
  • 4 GB DDR4 2400 MHz capacity for everyday workloads
  • CL17 timing at 1.2 V for efficient operation
  • 288-pin unbuffered DIMM fits HP Z238 and Z240 workstations
  • Single 4 GB module allows flexible upgrade to 64 GB
  • Major-brand chipset ensures reliable compatibility

Targeted upgrade for HP Z Workstations

This 4 GB DDR4 module is built for HP Z238 and Z240 Tower or SFF workstations. It delivers 2400 MHz speed with CL17 latency at 1.2 V. The unbuffered, non-ECC design matches the factory memory specification for these systems.

Standard DIMM form factor for tool-free installation

The 288-pin DIMM plugs directly into the workstation's four memory slots without adapters. No heat spreader keeps the profile low for small-form-factor chassis. A single stick lets you populate empty slots or replace a failed module individually.

Platform caps total memory at 64 GB across four

The workstation architecture limits combined capacity to 64 GB, so this 4 GB stick contributes to that ceiling. Non-ECC operation means error correction is unavailable for critical workloads. Mixed-rank population rules may apply when adding to existing modules.

Pluspunten

  • 4 GB DDR4 2400 MHz capacity for everyday workloads
  • CL17 timing at 1.2 V for efficient operation
  • 288-pin unbuffered DIMM fits HP Z238 and Z240 workstations
  • Single 4 GB module allows flexible upgrade to 64 GB
  • Major-brand chipset ensures reliable compatibility

Specificaties

BrandComputer Memory Solutions
ModelCM512642400DIMM
Capacity4GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Timing17-17-17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHP/Compaq Workstation Z238, Z240 Tower/SFF
Package Content1Memory Ram Stick

Vragen over dit artikel

What DDR4 speed does the CM512642400DIMM run at and what bandwidth does that provide?

The module operates at DDR4 2400 MHz, which corresponds to a PC4 19200 data rate.

Will this 288-pin DIMM fit inside an HP Z240 Tower or SFF chassis?

Yes, the 288-pin DDR4 DIMM is designed for the HP Z238 and Z240 Tower and SFF workstations listed in the compatibility data.

How do I install the stick and what common mistake should I avoid?

Align the notch on the 288-pin edge connector with the slot key, press down firmly until both retention clips click, and ensure the module is fully seated so the clips lock automatically.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.