OWC 16GB DDR4 3200MHz CL22 1.2V 260pin SODIMM Alienware X17 R1
- 16GB
- 260-Pin DDR4 Non-EC…
نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.
Computer Memory Solutions
4GB DDR4 2400MHz CL17 unbuffered DIMM upgrade for HP Z238 and Z240 workstations
This 4 GB DDR4 module is built for HP Z238 and Z240 Tower or SFF workstations. It delivers 2400 MHz speed with CL17 latency at 1.2 V. The unbuffered, non-ECC design matches the factory memory specification for these systems.
The 288-pin DIMM plugs directly into the workstation's four memory slots without adapters. No heat spreader keeps the profile low for small-form-factor chassis. A single stick lets you populate empty slots or replace a failed module individually.
The workstation architecture limits combined capacity to 64 GB, so this 4 GB stick contributes to that ceiling. Non-ECC operation means error correction is unavailable for critical workloads. Mixed-rank population rules may apply when adding to existing modules.
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM512642400DIMM |
| Capacity | 4GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Timing | 17-17-17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | HP/Compaq Workstation Z238, Z240 Tower/SFF |
| Package Content | 1Memory Ram Stick |
The module operates at DDR4 2400 MHz, which corresponds to a PC4 19200 data rate.
Yes, the 288-pin DDR4 DIMM is designed for the HP Z238 and Z240 Tower and SFF workstations listed in the compatibility data.
Align the notch on the 288-pin edge connector with the slot key, press down firmly until both retention clips click, and ensure the module is fully seated so the clips lock automatically.
أيضًا في هذا القسم
نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.
ما تدفعه، وما تُعرض به الأسعار.
يُرسَل من محفظتك عند إتمام الطلب
للعرض فقط — أسعار الكتالوج بالدولار الأمريكي
لا توجد عملة مطابقة.
اختر اللغة التي يخاطبك بها الموقع.
هل أنت جديد هنا؟
لديك حساب بالفعل؟
لا توجد إعادة تعيين تلقائية: هذا المتجر لا يُرسل أي بريد، فلا يوجد رابط لمرة واحدة يمكن طلبه. اترك العنوان في الحساب، وسيُعالَج الأمر يدويًا.
تم تسجيل الطلب
لا شيء في طريقه إلى بريدك الوارد — هذا المتجر لا يُرسل أي بريد إطلاقًا. يتولّى أحدهم معالجة هذه الطلبات يدويًا.
تذكّرتها؟