Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Black fully modular ATX power supply with 140 mm fan

Corsair

Corsair HX1500i CP-9020309-NA 1500 W power supply

SKU CH-XBC3-RKYGP MPN CP-9020309-NA

Fully modular ATX 3.1 unit delivers 1500 W with 92% efficiency, 140 mm fluid dynamic bearing fan, Zero RPM mode, Japanese 105°C capacitors and iCUE monitoring

  • ColorBlack
  • TypeATX 3.1 Compatible
  • Maximum Power1500 W
  • Fans1 x 140 mm
  • Main Connector24pin
  • Modularfull modular

Options ATX 3.1 80+ Platinum (1500W)

  • Fully modular cabling keeps the build tidy by using only the cables your system needs
  • ATX 3.1 compliance with PCIe 5.1 support handles transient power spikes on modern platforms
  • 140 mm fluid dynamic bearing fan runs quietly and lasts longer than sleeve alternatives
  • iCUE software lets you set custom fan curves and switch OCP modes on the fly
  • Zero RPM mode stops the fan completely at low to medium loads for near-silent operation

Fully modular ATX 3.1 power supply

This 1500 W unit delivers fully modular cabling so only the cables a build requires are installed. It is aimed at enthusiasts and workstation users who need reliable power for PCIe 5.1 graphics cards and high-end CPUs. The design follows the Intel ATX 3.1 standard and includes a 12V-2x6 cable for modern GPUs.

140 mm fluid dynamic bearing fan with Zero RPM mode

A single 140 mm fan uses fluid dynamic bearings for long life and quiet running. Zero RPM mode stops the fan completely at low to medium loads, keeping the system near-silent during everyday tasks. All capacitors are 105 °C rated Japanese electrolytics, and the fully modular layout simplifies cable routing inside any compatible case.

Cybenetics Platinum efficiency above 92 %

The supply meets 80 PLUS Platinum and Cybenetics Platinum targets, reaching over 92 % efficiency under typical loads. High efficiency reduces waste heat, which in turn lets the fan stay off longer and keeps noise to a minimum. iCUE software provides real-time monitoring and lets the user switch between single and multi-rail overcurrent protection on the fly. Modern Standby support enables fast wake-from-sleep.

Pluspunten

  • Fully modular cabling keeps the build tidy by using only the cables your system needs
  • ATX 3.1 compliance with PCIe 5.1 support handles transient power spikes on modern platforms
  • 140 mm fluid dynamic bearing fan runs quietly and lasts longer than sleeve alternatives
  • iCUE software lets you set custom fan curves and switch OCP modes on the fly
  • Zero RPM mode stops the fan completely at low to medium loads for near-silent operation

Specificaties

BrandCORSAIR
SeriesHX1500i
Part NumberCP-9020309-NA
ColorBlack
TypeATX 3.1 Compatible
Maximum Power1500 W
Fans1 x 140 mm
Main Connector24pin
Modularfull modular
Efficiency> 92%
Energy-EfficientUp to 92% efficiency
Input Voltage115 - 240 V
Input Frequency Range47 - 63 Hz
Input Current15A-9A
MTBF>100000 hours
FeaturesFully Modular, Platinum Efficiency, Fluid Dynamic Bearing Fan with Zero RPM Mode, 105°C rated 100% Japanese electrolytic capacitors, 10-year warranty, Intel ATX 3.1 certified, PCIe 5.1 compatible, iCUE Enabled, Multi GPU Ready, Dual 12V-2x6 cables
+5V Max. Current25A
+5VSB Max. Current3.5A
Fans Total Quantity1
Over Load ProtectionNo
Verzendgewicht5.22 kg
Pakketafmetingen356 × 254 × 127 mm

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will this 1500 W unit fit a standard ATX case?

The power supply follows the ATX 3.1 form factor and uses a single 140 mm fan, so it fits any case designed for standard ATX units.

What graphics-card power connector does the box include?

A 12V-2x6 cable is supplied, which meets the PCIe 5.1 specification for modern GPUs.

Can I monitor fan speed and rail configuration from Windows?

Yes, CORSAIR iCUE software provides custom fan curves, power monitoring and on-the-fly switching between single and multi-rail overcurrent protection.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.