We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Corsair

Corsair HX1500i CP-9020309-NA 1500 W power supply

SKU CH-XBC3-RKYGP MPN CP-9020309-NA

Fully modular ATX 3.1 unit delivers 1500 W with 92% efficiency, 140 mm fluid dynamic bearing fan, Zero RPM mode, Japanese 105°C capacitors and iCUE monitoring

  • ColorBlack
  • TypeATX 3.1 Compatible
  • Maximum Power1500 W
  • Fans1 x 140 mm
  • Main Connector24pin
  • Modularfull modular

Options ATX 3.1 80+ Platinum (1500W)

  • Fully modular cabling keeps the build tidy by using only the cables your system needs
  • ATX 3.1 compliance with PCIe 5.1 support handles transient power spikes on modern platforms
  • 140 mm fluid dynamic bearing fan runs quietly and lasts longer than sleeve alternatives
  • iCUE software lets you set custom fan curves and switch OCP modes on the fly
  • Zero RPM mode stops the fan completely at low to medium loads for near-silent operation

Fully modular ATX 3.1 power supply

This 1500 W unit delivers fully modular cabling so only the cables a build requires are installed. It is aimed at enthusiasts and workstation users who need reliable power for PCIe 5.1 graphics cards and high-end CPUs. The design follows the Intel ATX 3.1 standard and includes a 12V-2x6 cable for modern GPUs.

140 mm fluid dynamic bearing fan with Zero RPM mode

A single 140 mm fan uses fluid dynamic bearings for long life and quiet running. Zero RPM mode stops the fan completely at low to medium loads, keeping the system near-silent during everyday tasks. All capacitors are 105 °C rated Japanese electrolytics, and the fully modular layout simplifies cable routing inside any compatible case.

Cybenetics Platinum efficiency above 92 %

The supply meets 80 PLUS Platinum and Cybenetics Platinum targets, reaching over 92 % efficiency under typical loads. High efficiency reduces waste heat, which in turn lets the fan stay off longer and keeps noise to a minimum. iCUE software provides real-time monitoring and lets the user switch between single and multi-rail overcurrent protection on the fly. Modern Standby support enables fast wake-from-sleep.

Highlights

  • Fully modular cabling keeps the build tidy by using only the cables your system needs
  • ATX 3.1 compliance with PCIe 5.1 support handles transient power spikes on modern platforms
  • 140 mm fluid dynamic bearing fan runs quietly and lasts longer than sleeve alternatives
  • iCUE software lets you set custom fan curves and switch OCP modes on the fly
  • Zero RPM mode stops the fan completely at low to medium loads for near-silent operation

Specifications

BrandCORSAIR
SeriesHX1500i
Part NumberCP-9020309-NA
ColorBlack
TypeATX 3.1 Compatible
Maximum Power1500 W
Fans1 x 140 mm
Main Connector24pin
Modularfull modular
Efficiency> 92%
Energy-EfficientUp to 92% efficiency
Input Voltage115 - 240 V
Input Frequency Range47 - 63 Hz
Input Current15A-9A
MTBF>100000 hours
FeaturesFully Modular, Platinum Efficiency, Fluid Dynamic Bearing Fan with Zero RPM Mode, 105°C rated 100% Japanese electrolytic capacitors, 10-year warranty, Intel ATX 3.1 certified, PCIe 5.1 compatible, iCUE Enabled, Multi GPU Ready, Dual 12V-2x6 cables
+5V Max. Current25A
+5VSB Max. Current3.5A
Fans Total Quantity1
Over Load ProtectionNo
Shipping weight5.22 kg
Package size356 × 254 × 127 mm

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will this 1500 W unit fit a standard ATX case?

The power supply follows the ATX 3.1 form factor and uses a single 140 mm fan, so it fits any case designed for standard ATX units.

What graphics-card power connector does the box include?

A 12V-2x6 cable is supplied, which meets the PCIe 5.1 specification for modern GPUs.

Can I monitor fan speed and rail configuration from Windows?

Yes, CORSAIR iCUE software provides custom fan curves, power monitoring and on-the-fly switching between single and multi-rail overcurrent protection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.