Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Twenty small black anodised aluminium TO-220 heatsinks with M3 screw holes

EN-Labs

EN-Labs 20pcs 19x15x10mm TO-220 Aluminium Heatsink diy cooling

SKU CH-QMEW-96MM4

Pack of 20 anodised aluminium TO-220 heatsinks measuring 19×15×10 mm with M3 screw holes for MOS, L7805 and LM337 transistors

  • ColorBlack
  • CompatibilityMotherboard Chipsets
  • MaterialAluminium
  • FeaturesAluminum Heat-Sink, For Package TO-220 / L7805 /LM337 Triode
  • Dimensions19x 15x 10mm
  • Dissipates heat from TO-220 and L7805 devices
  • 20-piece lot covers multiple board locations
  • Anodised black aluminium resists corrosion
  • M3 screw hole simplifies secure mounting
  • Compact 19x15x10mm profile fits tight layouts

Compact TO-220 heatsink kit

This pack contains twenty anodised aluminium heatsinks measuring 19 x 15 x 10 mm with a 0.8 mm fin thickness and an M3 mounting hole. They are designed to fit TO-220 packaged devices such as L7805 and LM337 regulators as well as MOS transistors and similar IC chipsets. The black finish aids radiative cooling in hobby and repair projects.

Suited for discrete component cooling

Builders fitting individual voltage regulators, driver transistors or similar through-hole packages will find the dimensions match the TO-220 footprint. The kit is not intended for CPU or GPU cooling, nor for surface-mount devices that lack the required mounting tab and hole spacing. Buyers needing higher thermal capacity or forced-air integration should look at larger extrusion profiles.

Fits into prototype and repair builds

Each heatsink weighs roughly two grams and adds minimal height, leaving clearance for adjacent board components. The M3 hole allows direct bolting to the device tab or to a PCB mounting point without additional brackets. The twenty-piece quantity supports batch assembly or spares for multiple repair jobs.

Pluspunten

  • Dissipates heat from TO-220 and L7805 devices
  • 20-piece lot covers multiple board locations
  • Anodised black aluminium resists corrosion
  • M3 screw hole simplifies secure mounting
  • Compact 19x15x10mm profile fits tight layouts

Specificaties

ColorBlack
CompatibilityMotherboard Chipsets
MaterialAluminium
FeaturesAluminum Heat-Sink, For Package TO-220 / L7805 /LM337 Triode Transistors Cooler IC Chipset
Quantity: a lot of 20 Pieces
M3 Screw Hole.
Size: 19x 15x 10mm/ 0.8" x 0.6" x 0.4" (L*W*H)
Thickness" 0.8mm
Color : Anodized Black
Weight: 2g/ piece
Please check the specification table and make sure that the size of the heatsink fits that of your component
Dimensions19x 15x 10mm

Vragen over dit artikel

What mounting hardware do I need to attach these 19x15x10mm heatsinks to a TO-220 package?

Each heatsink has an M3 screw hole; you will need M3 screws and matching nuts or standoffs to secure it to the component.

Can these aluminium heatsinks be used on older L7805 or LM337 regulators that I already have on a board?

Yes, they are designed for TO-220 packages including L7805 and LM337 regulators, so they fit those existing components directly.

How can I verify the heatsinks are dissipating heat properly after installation?

Power the circuit and check that the TO-220 device stays within its thermal limits; the anodised black aluminium should feel warm but not excessively hot.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.