暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Twenty small black anodised aluminium TO-220 heatsinks with M3 screw holes

EN-Labs

EN-Labs 20pcs 19x15x10mm TO-220 Aluminium Heatsink diy cooling

SKU CH-QMEW-96MM4

Pack of 20 anodised aluminium TO-220 heatsinks measuring 19×15×10 mm with M3 screw holes for MOS, L7805 and LM337 transistors

  • ColorBlack
  • CompatibilityMotherboard Chipsets
  • MaterialAluminium
  • FeaturesAluminum Heat-Sink, For Package TO-220 / L7805 /LM337 Triode
  • Dimensions19x 15x 10mm
  • Dissipates heat from TO-220 and L7805 devices
  • 20-piece lot covers multiple board locations
  • Anodised black aluminium resists corrosion
  • M3 screw hole simplifies secure mounting
  • Compact 19x15x10mm profile fits tight layouts

Compact TO-220 heatsink kit

This pack contains twenty anodised aluminium heatsinks measuring 19 x 15 x 10 mm with a 0.8 mm fin thickness and an M3 mounting hole. They are designed to fit TO-220 packaged devices such as L7805 and LM337 regulators as well as MOS transistors and similar IC chipsets. The black finish aids radiative cooling in hobby and repair projects.

Suited for discrete component cooling

Builders fitting individual voltage regulators, driver transistors or similar through-hole packages will find the dimensions match the TO-220 footprint. The kit is not intended for CPU or GPU cooling, nor for surface-mount devices that lack the required mounting tab and hole spacing. Buyers needing higher thermal capacity or forced-air integration should look at larger extrusion profiles.

Fits into prototype and repair builds

Each heatsink weighs roughly two grams and adds minimal height, leaving clearance for adjacent board components. The M3 hole allows direct bolting to the device tab or to a PCB mounting point without additional brackets. The twenty-piece quantity supports batch assembly or spares for multiple repair jobs.

特長

  • Dissipates heat from TO-220 and L7805 devices
  • 20-piece lot covers multiple board locations
  • Anodised black aluminium resists corrosion
  • M3 screw hole simplifies secure mounting
  • Compact 19x15x10mm profile fits tight layouts

仕様

ColorBlack
CompatibilityMotherboard Chipsets
MaterialAluminium
FeaturesAluminum Heat-Sink, For Package TO-220 / L7805 /LM337 Triode Transistors Cooler IC Chipset
Quantity: a lot of 20 Pieces
M3 Screw Hole.
Size: 19x 15x 10mm/ 0.8" x 0.6" x 0.4" (L*W*H)
Thickness" 0.8mm
Color : Anodized Black
Weight: 2g/ piece
Please check the specification table and make sure that the size of the heatsink fits that of your component
Dimensions19x 15x 10mm

この商品に関する質問

What mounting hardware do I need to attach these 19x15x10mm heatsinks to a TO-220 package?

Each heatsink has an M3 screw hole; you will need M3 screws and matching nuts or standoffs to secure it to the component.

Can these aluminium heatsinks be used on older L7805 or LM337 regulators that I already have on a board?

Yes, they are designed for TO-220 packages including L7805 and LM337 regulators, so they fit those existing components directly.

How can I verify the heatsinks are dissipating heat properly after installation?

Power the circuit and check that the TO-220 device stays within its thermal limits; the anodised black aluminium should feel warm but not excessively hot.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。