Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two black aluminium heatsinks 40x40x11mm with finned tops

EN-Labs

EN-Labs 2pcs Black 40x40x11mm Aluminium Heatsink DIY Cooling

SKU CH-DYTY-V0P01

Two black aluminium heatsinks measuring 40 x 40 x 11 mm for chipset or power-IC cooling

  • ColorBlack
  • CompatibilityMotherboard Chipsets
  • MaterialAluminium
  • FeaturesWidely use for computer PC chipset, power IC, power electric
  • Dimensions40 x 40x 11mm
  • Compact 40 x 40 x 11 mm profile fits tight motherboard spaces
  • Black anodised aluminium radiates heat from chipsets and power ICs
  • Two heatsinks per pack cover multiple components in one purchase
  • Each unit weighs 33 g for minimal board stress
  • Adhesive mounting lets you secure sinks without clips or screws

Two-piece aluminium heatsink set

This set contains two black aluminium heatsinks measuring 40 x 40 x 11 mm each. They are intended for DIY cooling of motherboard chipsets, power ICs, LED devices and similar small electronic components. The lightweight 33 g total mass adds minimal load to the board.

Verify component dimensions and mounting method

Before ordering, confirm that the 40 mm square footprint and 11 mm height suit the target chip or module. Installation requires heatsink adhesive glue, which is not supplied, so have a suitable thermal adhesive ready. Ensure the mounting surface is flat and clean for proper contact.

Passive cooling with no fan noise

The heatsinks rely on natural convection, so they add zero acoustic noise to the system. Thermal performance depends on case airflow and the power dissipation of the attached component. In normal use the aluminium spreads heat across its 1.6 inch square surface without drawing any power.

Pluspunten

  • Compact 40 x 40 x 11 mm profile fits tight motherboard spaces
  • Black anodised aluminium radiates heat from chipsets and power ICs
  • Two heatsinks per pack cover multiple components in one purchase
  • Each unit weighs 33 g for minimal board stress
  • Adhesive mounting lets you secure sinks without clips or screws

Specificaties

ColorBlack
CompatibilityMotherboard Chipsets
MaterialAluminium
FeaturesWidely use for computer PC chipset, power IC, power electric device, LED light devices, etc.Use heatsink adhesive glue to install heatsink .(Glue is not included)Please check the specification table and make sure that the size of the heatsink fits that of your component.
Specification
product name: Heatsink;
Material : Aluminium
Color : Black
Overall Size : 40 x 40x 11mm/ 1.6" x 1.6" x 0.49" (L*W*H)
Weight : 33g
Package Content : 2 x Heatsink
Dimensions40 x 40x 11mm

Vragen over dit artikel

What comes in the pack and do I need anything else to fit them?

The pack contains two black aluminium heatsinks measuring 40 x 40 x 11 mm and weighing 33 g each. Thermal adhesive glue is required for installation and is not included.

How do I know the 40 x 40 x 11 mm size will suit my chipset?

Measure the flat surface of the chip or component you want to cool; the heatsink footprint is 40 mm by 40 mm and stands 11 mm tall, so it will cover any device that fits within those dimensions.

What does the 11 mm height mean once the heatsink is glued on a motherboard?

After bonding, the assembly adds roughly 11 mm of clearance above the chip, so confirm that your case, GPU back-plate or adjacent components allow at least that much space.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.