Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

EN-Labs

EN-Labs PCE4USB-RS1 4-Port USB 3.0 PCIe Expansion Card

SKU CH-VSRQ-W0CDV

Adds four USB 3.0 ports — two external Type-A and two via a 20-pin internal header — through a PCIe x1 slot with SATA power for high-draw devices

  • TypePCI Express to USB Card
  • External USB Ports2 Ext / 2 Int
  • SpecificationsBus Type:PCI Express Type Standard:Profile (LP bracket incl.
  • FeaturesAdd 4 USB 3.0 ports(2 x Type A + 20 Pin Interna) through a P
  • Package Contents1 x PCIe USB 3.0 PCI express card 1 x Driver CD

Model 2x Type A – Ext

  • Add four USB 3.0 ports via a single PCIe slot
  • Two external Type-A ports for direct peripheral access
  • Internal 20-pin header adds two front-panel USB 3.0 ports
  • NEC UPD720201 chipset delivers 5 Gbps per port
  • 15-pin SATA power connector supports high-draw devices

EN-Labs 4-Port USB 3.0 PCIe Card

This EN-Labs expansion card adds four USB 3.0 ports to a desktop computer through an available PCI Express slot. It provides two external Type-A ports and two internal ports via a 20-pin header for front-panel connectivity. The card suits builders who need more USB 3.0 connections for peripherals or front-panel upgrades.

Installation notes and common issues

The card fits PCIe x1, x4, x8 and x16 slots and includes a full-profile bracket with a low-profile bracket supplied. A 15-pin SATA power connector is present on the board and must be connected for power-hungry devices; forgetting this cable is the most frequent reason ports appear dead. Driver installation from the included CD or a download is required before the ports become active.

NEC UPD720201 chipset and 5 Gbps limit

The NEC UPD720201 controller delivers up to 5 Gbps per port and is backward compatible with USB 2.0 and USB 1.1 devices. The single PCIe 2.0 x1 host link caps total throughput at the same 5 Gbps, so simultaneous heavy traffic on all four ports will share that bandwidth. Buyers needing higher aggregate throughput or more than four ports should choose a different solution.

Pluspunten

  • Add four USB 3.0 ports via a single PCIe slot
  • Two external Type-A ports for direct peripheral access
  • Internal 20-pin header adds two front-panel USB 3.0 ports
  • NEC UPD720201 chipset delivers 5 Gbps per port
  • 15-pin SATA power connector supports high-draw devices

Specificaties

BrandEn-Labs
ModelPCE4USB-RS1
TypePCI Express to USB Card
External USB Ports2 Ext / 2 Int
SpecificationsBus Type:PCI Express
Type Standard:Profile (LP bracket incl.)
Chipset:NEC UPD720201
Interface: USB 3.0 Port
Type and Rate :USB 3.0 - 5 Gbit/s
Connector Type(s): 1 - PCI Express x1 Male
External Ports: 2 - USB Type-A (9 pin) USB 3.0 Female
Internal Ports : 2 x US 3.0 Internal Ports (20 pin connector) front panel for floppy bay
Internal Ports : 1 - SATA 15 pin interface
FeaturesAdd 4 USB 3.0 ports(2 x Type A + 20 Pin Interna) through a PCI Express slot
Compatible with PCI-Express 2.0 stardard
Compatible with Super Speed USB 3.0 5Gbps stardard,backwards to USB 2.0 and USB 1.1
Compatible with XHCI specification 1.0
Chip set : NEC UPD720201
Maximum transfer speed : 5Gbps
Power by PCIe slot,no extra power adapter is needed, but still built-in power-enhanced SATA 15pin male Interface
Supports PCIe 1x, 4x, 8x, 16x Slot
Support Windows XP / 2003 / Win7 / Win8 / Vista / Linux
Package Contents1 x PCIe USB 3.0 PCI express card
1 x Driver CD

Andere versies van dit model

Nog 2 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How do I confirm the NEC UPD720201 chipset is running at 5 Gbps after installation?

Check Device Manager under Universal Serial Bus controllers; the card should appear as a USB 3.0 host controller. Run a file transfer to a USB 3.0 flash drive and verify speeds approach 5 Gbps.

What comes in the box and which cable must I supply?

The package includes the PCIe card, a low-profile bracket, and a driver CD. You must provide a SATA 15-pin power cable from your PSU to the card's onboard connector.

Should I choose the 20-pin internal header or the two external Type-A ports for front-panel USB 3.0?

Use the 20-pin internal header to add two USB 3.0 ports to your case front panel; the two external Type-A ports are fixed at the rear bracket for rear-access devices.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.