Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Two black DDR4 sticks with aluminum heatspreaders

G.SKILL

G.SKILL F4-3200C16D-16GVKB Ripjaws V 16GB DDR4 desktop RAM

SKU CH-KQSP-5BJRV MPN F4-3200C16D-16GVKB

Dual-channel 16 GB DDR4 kit at 3200 MT/s with CL16 timing, 1.35 V and XMP 2.0 support

  • Capacity16GB (2 x 8GB)
  • Type288-Pin PC RAM
  • SpeedDDR4 3200 (PC4 25600)
  • CAS LatencyCL16
  • Timing16-18-18-38
  • Voltage1.35V

Capacity 16GB (2 x 8GB)

Speed DDR4 3200 (PC4 25600)

CAS Latency · Color · Fan Included CL16 · Black · No

  • Dual-channel 16 GB kit enables smooth multitasking
  • DDR4 3200 speed delivers fast data transfer
  • CL16 16-18-18-38 timing cuts latency
  • 35 V operation keeps power draw low
  • 42 mm height fits under large CPU coolers

G.SKILL Ripjaws V 16GB DDR4 Kit

This G.SKILL Ripjaws V kit provides 16GB of DDR4 desktop memory in a matched dual-channel pair of 8GB modules. It runs at DDR4 3200 with CL16 latency and 1.35V. The black aluminum heatspreader is 42mm tall. Intel XMP 2.0 is supported for automatic configuration on compatible platforms.

Suits Intel Z170 to Z790 DDR4

This kit suits builders targeting Intel Z170, Z270, Z370, Z390, Z490, Z590, Z690 DDR4 or Z790 DDR4 chipsets and AMD B450, B550, X470 or X570 chipsets. It is unbuffered non-ECC memory, so it is not intended for server or workstation platforms that require registered or ECC DIMMs. Do not mix this kit with other memory kits.

Verify motherboard DDR4 support

Before ordering, confirm your motherboard accepts DDR4 288-pin DIMMs and supports the desired speed. Check that your CPU cooler allows at least 42mm of module height for the heatspreader. Ensure the board can supply 1.35V and that you populate the correct slots for dual-channel operation.

Pluspunten

  • Dual-channel 16 GB kit enables smooth multitasking
  • DDR4 3200 speed delivers fast data transfer
  • CL16 16-18-18-38 timing cuts latency
  • 35 V operation keeps power draw low
  • 42 mm height fits under large CPU coolers

Specificaties

BrandG.SKILL
SeriesRipjaws V Series
ModelF4-3200C16D-16GVKB
Capacity16GB (2 x 8GB)
Type288-Pin PC RAM
SpeedDDR4 3200 (PC4 25600)
CAS LatencyCL16
Timing16-18-18-38
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
BIOS/Performance ProfileIntel XMP 2.0
ColorBlack
Heat SpreaderYes
FeaturesOverclock performance DDR4 memory designed for compatible Intel platforms.
Sleek and stylish aluminum heatspreader design.
Intel XMP 2.0 support.
Do not mix memory kits. Memory kits are sold in matched kits that are designed to run together as a set. Mixing memory kits will result in stability issues or system failure.
Memory kits will boot at the SPD speed at default BIOS settings with compatible hardware.
For memory kits with XMP, enable XMP/DOCP/A-XMP in BIOS to reach the rated potential XMP overclock speed of the memory kit, subject to the use of compatible hardware.
Reaching the
Recommend UseAMD X570 / X470 / B550 / B450
Intel Z790 DDR4 / Z690 DDR4 / Z590 / Z490 / Z390 / Z370 / Z270 / Z170
Verzendgewicht0.12 kg
Pakketafmetingen204 × 133 × 18 mm

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

Will the 42mm module height clear my large CPU cooler?

The Ripjaws V modules measure 42mm tall, which is designed to fit under most oversized CPU heatsinks without interference.

Which motherboard chipsets are validated for this DDR4 3200 kit?

G.SKILL lists compatibility with AMD X570, X470, B550, B450 and Intel Z790, Z690, Z590, Z490, Z390, Z370, Z270, Z170 DDR4 platforms.

Do I need to enable XMP 2.0 to reach the rated 3200 speed?

Yes, the kit is programmed for Intel XMP 2.0; enable the profile in BIOS to run at DDR4 3200 CL16-18-18-38 at 1.35V.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.