Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Rectangular ATX power supply unit with single fan, matte metal finish, reduced depth design

Gulfe

Gulfe ATX Power Supply for HP Pavilion H8 1031NL 1034DE 1035CN

SKU CH-0P7K-0CY3E

ATX power supply replaces legacy units in HP Pavilion H8 desktops with 24-pin ATX, 4-pin CPU, three SATA and two LP4 connectors

  • TypeATX
  • Fans1
  • Weight2.5
  • Replaces legacy HP units with exact-fit ATX design
  • Dual-voltage 115/230 V input works worldwide
  • Over-current and over-power protection guards components
  • Reduced 5.9" depth fits compact chassis easily
  • 24-pin ATX plus 4-pin CPU and three SATA connectors

Targeted replacement

This ATX power supply is built to replace the original unit in HP Pavilion H8 1031NL, 1034DE and 1035CN desktops. Its reduced depth helps it fit the proprietary chassis without modification. The unit delivers the standard +5V, -5V, +12V1, +12V2, +3.3V, -12V and +5V-SB rails required by those systems.

Thermals and protection

A single fan provides airflow through the compact housing while over-current and over-power protection circuits guard connected components. The supplier notes high efficiency and low ripple and noise, with a rise time under 70 ms and a minimum hold-up time of 17 ms at nominal input. AC input accepts 115 or 230 V at 47 to 63 Hz.

Connector bundle

The fixed cable set includes a 24-pin ATX connector, one 4-pin P4 12V plug, three SATA 15-pin connectors, two LP4 4-pin plugs and one floppy 4-pin connector. This mix covers the motherboard, processor, drives and legacy peripherals found in the target HP models without needing adapters.

Pluspunten

  • Replaces legacy HP units with exact-fit ATX design
  • Dual-voltage 115/230 V input works worldwide
  • Over-current and over-power protection guards components
  • Reduced 5.9" depth fits compact chassis easily
  • 24-pin ATX plus 4-pin CPU and three SATA connectors

Specificaties

BrandGulfe
TypeATX
Fans1
Weight2.5

Vragen over dit artikel

How do I install the 24-pin ATX connector and the 4-pin P4 power cable without forcing them?

Align the 20+4 pin ATX connector with the motherboard keying and press until the latch clicks; then plug the P4 4-pin cable into the CPU power header, matching the square and rounded pins exactly.

Which parts of this power supply are most likely to need replacement after long-term use?

The single internal fan is the primary wear item; dust buildup on its blades reduces airflow, so plan to clean or replace the fan if noise or temperatures rise.

What is the first limit reached when the unit runs at full load continuously?

The 17 ms minimum hold-up time at nominal input is the first hard limit; if mains power dips longer than that, output voltage will drop before the protection circuits act.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.