Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen

HPE

HPE P09165-B21 14 TB 3.5" 7200 RPM SATA internal hard drive

SKU CH-5XH4-VB14G

14 TB 3.5" internal hard drive with 7200 RPM spindle speed and SATA 6.0 Gb/s interface

  • InterfaceSATA 6.0Gb/s
  • Capacity14TB
  • RPM7200 RPM
  • Form Factor3.5"
  • 14 TB capacity stores large data sets
  • 7200 RPM spindle speed delivers responsive throughput
  • SATA 6.0 Gb/s interface enables fast host transfers
  • 512e disk format supports modern operating systems
  • 5 inch form factor fits standard desktop bays

HPE P09165-B21 14 TB SATA Hard Drive

The HPE P09165-B21 is a 14 TB internal hard drive built for desktop systems and entry-level servers. It uses a 3.5 inch form factor and connects through a SATA 6.0Gb/s interface. The drive spins at 7200 RPM and uses a 512e disk format for broad compatibility. It ships new in retail or OEM packaging that may vary.

Suited for bulk storage.

This drive suits users who need high-capacity storage for archives, backups or media libraries where cost per terabyte matters most. It is not intended for workloads that require the low latency or high random IOPS of solid-state storage. Builders populating 2.5 inch bays or systems limited to SATA 3.0Gb/s should verify mechanical and electrical fit before purchase.

512e disk format decides host compatibility

The 512e disk format presents 512 byte logical sectors to the operating system while using 4K physical sectors on the media. Older operating systems or RAID controllers that lack 512e support may not recognise the full 14 TB capacity. Confirm that your host bus adapter, BIOS and OS handle 512e drives before installing this model.

Pluspunten

  • 14 TB capacity stores large data sets
  • 7200 RPM spindle speed delivers responsive throughput
  • SATA 6.0 Gb/s interface enables fast host transfers
  • 512e disk format supports modern operating systems
  • 5 inch form factor fits standard desktop bays

Specificaties

BrandHPE
Part NumberP09165-B21
InterfaceSATA 6.0Gb/s
Capacity14TB
RPM7200 RPM
Form Factor3.5"

Vragen over dit artikel

What does the SATA 6.0Gb/s interface cap the HPE P09165-B21 at in practice?

The SATA 6.0Gb/s interface limits the drive to a maximum theoretical throughput of 600 MB/s, which is the ceiling for sequential read and write operations on this 14 TB model.

What physical space and mounting does the 3.5" HPE P09165-B21 require?

This drive needs a standard 3.5-inch internal bay and uses the typical bottom and side screw holes for secure mounting in a desktop chassis or server tray.

How is the HPE P09165-B21 installed, and what step is often missed?

Connect the SATA data cable to the motherboard and the SATA power cable from the PSU, then initialise the 512e formatted disk in the operating system — skipping initialisation leaves the 14 TB volume invisible.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.