HPE
HPE P09165-B21 14 TB 3.5" 7200 RPM SATA internal hard drive
14 TB 3.5" internal hard drive with 7200 RPM spindle speed and SATA 6.0 Gb/s interface
- InterfaceSATA 6.0Gb/s
- Capacity14TB
- RPM7200 RPM
- Form Factor3.5"
- 14 TB capacity stores large data sets
- 7200 RPM spindle speed delivers responsive throughput
- SATA 6.0 Gb/s interface enables fast host transfers
- 512e disk format supports modern operating systems
- 5 inch form factor fits standard desktop bays
HPE P09165-B21 14 TB SATA Hard Drive
The HPE P09165-B21 is a 14 TB internal hard drive built for desktop systems and entry-level servers. It uses a 3.5 inch form factor and connects through a SATA 6.0Gb/s interface. The drive spins at 7200 RPM and uses a 512e disk format for broad compatibility. It ships new in retail or OEM packaging that may vary.
Suited for bulk storage.
This drive suits users who need high-capacity storage for archives, backups or media libraries where cost per terabyte matters most. It is not intended for workloads that require the low latency or high random IOPS of solid-state storage. Builders populating 2.5 inch bays or systems limited to SATA 3.0Gb/s should verify mechanical and electrical fit before purchase.
512e disk format decides host compatibility
The 512e disk format presents 512 byte logical sectors to the operating system while using 4K physical sectors on the media. Older operating systems or RAID controllers that lack 512e support may not recognise the full 14 TB capacity. Confirm that your host bus adapter, BIOS and OS handle 512e drives before installing this model.
Najważniejsze cechy
- 14 TB capacity stores large data sets
- 7200 RPM spindle speed delivers responsive throughput
- SATA 6.0 Gb/s interface enables fast host transfers
- 512e disk format supports modern operating systems
- 5 inch form factor fits standard desktop bays
Specyfikacja
| Brand | HPE |
|---|---|
| Part Number | P09165-B21 |
| Interface | SATA 6.0Gb/s |
| Capacity | 14TB |
| RPM | 7200 RPM |
| Form Factor | 3.5" |
Pytania dotyczące tego produktu
What does the SATA 6.0Gb/s interface cap the HPE P09165-B21 at in practice?
The SATA 6.0Gb/s interface limits the drive to a maximum theoretical throughput of 600 MB/s, which is the ceiling for sequential read and write operations on this 14 TB model.
What physical space and mounting does the 3.5" HPE P09165-B21 require?
This drive needs a standard 3.5-inch internal bay and uses the typical bottom and side screw holes for secure mounting in a desktop chassis or server tray.
How is the HPE P09165-B21 installed, and what step is often missed?
Connect the SATA data cable to the motherboard and the SATA power cable from the PSU, then initialise the 512e formatted disk in the operating system — skipping initialisation leaves the 14 TB volume invisible.
Także w tym dziale
Klienci porównywali też te produkty
Ten sam dział, ta sama kasa — osiem kryptowalut i 30-minutowa blokada kursu.
