Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
HPE RPS 800-A external redundant power supply unit, multicolor metal chassis, 1.7 by 17.4 by 7.2 inches, 8.38 lb

HPE

HPE RPS 800-A Redundant Power Supply JD183A

SKU CH-NMC7-JKACG

External DC power supply for H3C S5500-52C-EI switch, delivering 12 V and 54 V redundant backup with cold-switching on power failure

  • ColorMulticolor
  • TypeRedundant Power Supply
  • Provides redundant backup power for the H3C S5500-52C-EI switch
  • Delivers +12 V DC and -54 V DC concurrently via selective outputs
  • Activates only when the primary supply fails with cold backup
  • Compact 1.7" height fits standard 17.4" rack width
  • Weighs 8.38 lb for straightforward rack installation

Target Switch and Role

The HPE RPS 800-A is an external redundant power supply designed for the H3C S5500-52C-EI switch. It accepts AC input and delivers selectable DC output to keep the switch running during an internal power supply failure. This unit suits network administrators who need cold-standby backup for a single compatible switch.

Output Voltage Constraints

The supply provides +12 V DC, -54 V DC or both voltages simultaneously depending on which DC output cables are connected. It only activates its DC output when it detects a power supply failure in the powered device, so it does not share load during normal operation. Buyers who need active load-sharing or hot-swap redundancy cannot use this unit.

Upgrade From No Backup

This RPS replaces a configuration with no external power redundancy for the S5500-52C-EI. The jump is worth it when downtime from a single internal supply failure is unacceptable and the switch chassis matches the listed compatibility. It does not support other switch models or higher-wattage requirements.

Pluspunten

  • Provides redundant backup power for the H3C S5500-52C-EI switch
  • Delivers +12 V DC and -54 V DC concurrently via selective outputs
  • Activates only when the primary supply fails with cold backup
  • Compact 1.7" height fits standard 17.4" rack width
  • Weighs 8.38 lb for straightforward rack installation

Specificaties

BrandHPE
ColorMulticolor
TypeRedundant Power Supply

Vragen over dit artikel

Which HPE redundant power supply model matches my S5500-52C-EI switch?

The RPS 800-A with part number JD183A is built for the H3C S5500-52C-EI, delivering selective +12 V and -54 V DC backup when the internal supply fails.

What does the 800 W rating mean once the unit is connected to my switch?

It indicates the maximum AC input capacity at 240 V; the RPS only activates its DC outputs (+12 V and -54 V) after detecting an internal power-supply failure in the switch.

What interface does the RPS 800-A use and what does it limit in practice?

It connects through dedicated DC output cables to the S5500-52C-EI, capping backup power to the switch's +12 V and -54 V rails and only engaging on internal supply failure.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.