HPE MSR954 JH296AABA 1GbE SFP 2GbE WAN 4GbE LAN CWv7 wireless router
- Gigabit Ethernet
Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.
KuWfi
Point-to-point wireless bridge kit with two 2.4 GHz 300 Mbps units, each using an 11 dBi panel antenna and PoE power
The KuWfi CPE70R US is a 2.4 GHz wireless bridge kit built for point-to-point or point-to-multipoint links. It suits installers who need a pre-paired WDS connection between buildings without running cable.
Each unit draws power through a 24 V passive PoE injector and provides one 10/100 Mbps WAN port and one 10/100 Mbps LAN port. The 11 dBi panel antenna with a 60° vertical and 33° horizontal beamwidth focuses signal for long-range outdoor alignment. A web-based interface and LED display show channel, signal strength and operation mode for on-site setup.
This kit fits projects that need a simple transparent bridge at up to 300 Mbps PHY rate on 802.11n. Buyers who require gigabit Ethernet ports, 5 GHz operation, or mesh roaming between multiple indoor access points should look elsewhere.
| Brand | KuWfi |
|---|---|
| Model | CPE70R US |
| Standards | IEEE 802.11b/g/n |
| Security | 64/128-bit WEP security, 128bit WPA (TKIP/AES) security |
| WPA | WPA |
| WAN Ports | 1 * 10/100Mbps RJ45 WAN Port |
| LAN Ports | 1 * 10/100Mbps RJ45 LAN Port |
| LEDs | PWR(Power), WAN, LAN, Wi-Fi |
The 11dBi panel antenna with 60° vertical and 33° horizontal beamwidth is designed for long-range point-to-point or point-to-multipoint links, but the maximum distance at full 300Mbps depends on line-of-sight clarity and interference.
The unit draws 24V at 0.5A via passive PoE, consuming around 12W; with no active cooling, it relies on the metal enclosure for passive heat dissipation during 24/7 operation.
You need a 24V 0.5A passive PoE injector or compatible switch, plus a router or controller with an Ethernet port for the 10/100Mbps LAN connection and web-based configuration access.
Ook in deze afdeling
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Waarmee u betaalt, en waarin u de prijzen leest.
Verzonden vanuit uw wallet bij het afrekenen
Alleen ter weergave — de catalogus is geprijsd in USD
Geen valuta gevonden.
Kies de taal waarin de site met u spreekt.
Nieuw hier?
Al een account?
Er is geen automatisch herstel: deze winkel verstuurt geen e-mail, dus er is geen eenmalige link om aan te vragen. Laat het adres op het account achter en het wordt handmatig opgepakt.
Verzoek genoteerd
Er is niets onderweg naar uw inbox — deze winkel verstuurt helemaal geen e-mail. Iemand pakt dit handmatig op.
Weet u het weer?