Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Grey silicone thermal pad 85 by 45 by 1.0 mm

Lirealar

Lirealar 85x45mm thermal pad 12.8 W/mK 1.0mm 15g

SKU CH-BXGX-W5WNY MPN 85x45mm

Silicone thermal pad measuring 85 by 45 by 1.0 mm with 12.8 W/mK conductivity, non-conductive insulation, and a -40 °C to 200 °C operating range

  • Volume / Net Weight15g
  • Thermal Conductivity12.8 W/mK,
  • Long Term Operating Temperature-40 C to +400C
  • SpecificationsColor:Gray Thermal Conductivity:12.8W/M-K Density:3.1±0.2g/c
  • FeaturesNon-Elecnical Conducive Non-Corrosive, Non-Curing & Non-Toxi

Type Thermal Pad

Model 85x45mm

Doorgestreepte varianten bestaan wel, maar zijn hier niet op voorraad.

Specification 1.0mm

Nog 1 configuraties tonen
  • High thermal conductivity of 12.8 W/mK moves heat quickly
  • Non-conductive insulation prevents electrical shorts
  • Operates reliably from -40 °C to 200 °C
  • Soft 30–55 Shore C hardness fills uneven gaps
  • Reusable silicone pad resists curing and corrosion

Thermal pad 85 × 45 mm 1.0 mm thick

This silicone thermal pad measures 85 mm by 45 mm with a 1.0 mm thickness and weighs 15 g. It provides a thermal conductivity of 12.8 W/mK and operates from −40 °C to +200 °C. The material is non-conductive, non-corrosive, non-curing and non-toxic.

Suits single-component gap filling.

The pad fits one GPU, CPU, laptop heatsink or LED cooler where a single 85 × 45 mm piece covers the contact area. Builds that need to bridge several separate dies or larger surfaces will require additional pads or a different format. The one-piece design limits use to individual component interfaces.

12.8 W/mK conductivity decides fit

Thermal conductivity of 12.8 W/mK is the key figure that determines whether this pad meets the cooling demand of the target component. Lower-conductivity pads may not transfer heat quickly enough for high-power devices, while higher-conductivity options exist for more extreme loads. Match the 12.8 W/mK rating to the thermal design power of the part being cooled.

Pluspunten

  • High thermal conductivity of 12.8 W/mK moves heat quickly
  • Non-conductive insulation prevents electrical shorts
  • Operates reliably from -40 °C to 200 °C
  • Soft 30–55 Shore C hardness fills uneven gaps
  • Reusable silicone pad resists curing and corrosion

Specificaties

SeriesThermal Pad
Model85x45x1mm
Volume / Net Weight15g
Thermal Conductivity12.8 W/mK,
Long Term Operating Temperature-40 C to +400C
SpecificationsColor:Gray Thermal Conductivity:12.8W/M-K Density:3.1±0.2g/cc Hardness:30-55(Sc) Breakdown Voltage:>9.8KV(1mm) Temperature Range:-40°C~200°C
FeaturesNon-Elecnical Conducive Non-Corrosive, Non-Curing & Non-Toxi One Pad , multi-purpose, durable,insulated, non-conductive lnsulation does not conduct electricity and is safe for use Natural viscosity, easy to assemble and reusable

Andere versies van dit model

Nog 5 in dezelfde serie

Dezelfde familie, met ander geheugen, andere koeler of kloksnelheid — vergelijk voordat u beslist.

Vragen over dit artikel

How can I confirm the pad is working correctly after installing it on my GPU?

Monitor GPU temperatures under load; the 12.8 W/mK conductivity should lower junction temps compared to the previous interface material.

Does the 15 g package include only the single 85 x 45 x 1.0 mm pad or are extra shims supplied?

The box contains one gray silicone pad measuring 85 x 45 x 1.0 mm weighing 15 g; no additional shims or compound are included.

Should I choose the 1.0 mm thickness or a different height for a laptop heatsink gap?

Select 1.0 mm when the measured gap between die and heatsink is approximately 1 mm; the pad compresses within the 30-55 Shore C range to fill uneven surfaces.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.