Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Compact silver servo with metal gears and aluminium housing, 40 by 20 by 38 mm

LORDWORLD

LORDWORLD 35KG 270° Coreless Metal Gear Waterproof Servo

SKU CH-R1W8-4RB8P

A 35 kg·cm coreless servo with stainless-steel gears, 270° rotation, IP66 waterproofing and an aluminium shell for RC cars, robots and DIY projects

  • High torque for heavy loads with 35KG·cm at 7.4V
  • Wide 270° rotation range suits complex robotic movements
  • Coreless motor and stainless steel gears give quick response
  • IP66 waterproof rating protects against splashes and moisture
  • Compact 40×20×38mm size fits 1/10 to 1/12 scale models

High-torque coreless servo

The LORDWORLD servo delivers 35KG.cm of torque at 7.4V using a coreless motor and stainless steel gears. Its 270° rotation range suits robot DIY, RC cars, boats and airplane models. The aluminium alloy shell aids heat dissipation and the unit weighs 60g with a 40x20x38mm footprint. IP66 waterproofing allows operation in splash-prone conditions.

Capacity and headroom

At 35KG.cm the servo handles steering and actuation on 1/6, 1/8, 1/10 and 1/12 scale vehicles with quick response. The coreless design gives fast acceleration but sustained high-load cycles will increase shell temperature despite the alloy casing. Projects needing more than 270° of travel or continuous rotation cannot use this unit.

Build integration

Standard three-wire connection fits typical RC receivers and Arduino-compatible controllers without extra drivers. The included metal servo arm mounts directly to the output spline. Compact 40x20x38mm dimensions leave room in tight chassis layouts while the IP66 rating frees the builder from sealing the servo bay against splashes.

Pluspunten

  • High torque for heavy loads with 35KG·cm at 7.4V
  • Wide 270° rotation range suits complex robotic movements
  • Coreless motor and stainless steel gears give quick response
  • IP66 waterproof rating protects against splashes and moisture
  • Compact 40×20×38mm size fits 1/10 to 1/12 scale models

Specificaties

BrandLORDWORLD

Vragen over dit artikel

Will the 270° rotation range and 35kg.cm torque at 7.4V work with my existing 1/10 scale RC car receiver?

The servo delivers 35kg.cm torque at 7.4V across a 270° range and fits 1/10 scale RC cars, so it matches standard PWM receivers used in those models.

How can I confirm the coreless motor and stainless steel gears are operating correctly after installation?

Apply 7.4V and command a full 270° sweep; smooth, fast movement with no gear noise shows the coreless motor and stainless steel gears are working as intended.

Does the package include the metal servo arm and mounting hardware, or must I buy them separately?

The supplier highlights mention an accompanying metal servo arm, and the 40x20x38mm aluminium alloy shell has standard mounting tabs, so the arm and basic mounting points are included.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.