暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
Compact silver servo with metal gears and aluminium housing, 40 by 20 by 38 mm

LORDWORLD

LORDWORLD 35KG 270° Coreless Metal Gear Waterproof Servo

SKU CH-R1W8-4RB8P

A 35 kg·cm coreless servo with stainless-steel gears, 270° rotation, IP66 waterproofing and an aluminium shell for RC cars, robots and DIY projects

  • High torque for heavy loads with 35KG·cm at 7.4V
  • Wide 270° rotation range suits complex robotic movements
  • Coreless motor and stainless steel gears give quick response
  • IP66 waterproof rating protects against splashes and moisture
  • Compact 40×20×38mm size fits 1/10 to 1/12 scale models

High-torque coreless servo

The LORDWORLD servo delivers 35KG.cm of torque at 7.4V using a coreless motor and stainless steel gears. Its 270° rotation range suits robot DIY, RC cars, boats and airplane models. The aluminium alloy shell aids heat dissipation and the unit weighs 60g with a 40x20x38mm footprint. IP66 waterproofing allows operation in splash-prone conditions.

Capacity and headroom

At 35KG.cm the servo handles steering and actuation on 1/6, 1/8, 1/10 and 1/12 scale vehicles with quick response. The coreless design gives fast acceleration but sustained high-load cycles will increase shell temperature despite the alloy casing. Projects needing more than 270° of travel or continuous rotation cannot use this unit.

Build integration

Standard three-wire connection fits typical RC receivers and Arduino-compatible controllers without extra drivers. The included metal servo arm mounts directly to the output spline. Compact 40x20x38mm dimensions leave room in tight chassis layouts while the IP66 rating frees the builder from sealing the servo bay against splashes.

特長

  • High torque for heavy loads with 35KG·cm at 7.4V
  • Wide 270° rotation range suits complex robotic movements
  • Coreless motor and stainless steel gears give quick response
  • IP66 waterproof rating protects against splashes and moisture
  • Compact 40×20×38mm size fits 1/10 to 1/12 scale models

仕様

BrandLORDWORLD

この商品に関する質問

Will the 270° rotation range and 35kg.cm torque at 7.4V work with my existing 1/10 scale RC car receiver?

The servo delivers 35kg.cm torque at 7.4V across a 270° range and fits 1/10 scale RC cars, so it matches standard PWM receivers used in those models.

How can I confirm the coreless motor and stainless steel gears are operating correctly after installation?

Apply 7.4V and command a full 270° sweep; smooth, fast movement with no gear noise shows the coreless motor and stainless steel gears are working as intended.

Does the package include the metal servo arm and mounting hardware, or must I buy them separately?

The supplier highlights mention an accompanying metal servo arm, and the 40x20x38mm aluminium alloy shell has standard mounting tabs, so the arm and basic mounting points are included.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。