Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
LORDWORLD 4 inch capacitive touch display board with IPS panel showing 480 by 800 resolution

LORDWORLD

LORDWORLD 4inch Capacitive Touch Display 480×800 development board

SKU CH-2MYJ-5VFWS

A 480×800 capacitive touch display with five-point input that connects via DSI to Raspberry Pi 4B, 3B+, 3A+ and Compute Modules 3+ or 4 using an adapter board

  • 4-inch IPS panel gives clear visuals at 480×800 resolution
  • Capacitive touch recognises up to five simultaneous points
  • Works with Raspberry Pi 4B, 3B+ and 3A+ out of the box
  • Compatible with Compute Module 3+ and 4 using an extra adapter board

4-inch Capacitive Touch Display for Raspberry Pi

The LORDWORLD panel provides a 480×800 IPS screen with five-point capacitive touch for Raspberry Pi OS projects. It connects through the DSI interface on Pi 4B, 3B+, 3A+, CM3+ and CM4 modules. A software driver must be installed before the touch layer becomes active. Developers building handheld or kiosk interfaces can start prototyping immediately.

DSI Connection and Adapter Requirements

The board mounts directly to the Pi's DSI ribbon socket, keeping the internal layout compact for embedded enclosures. CM3+ and CM4 modules need a separate adapter board that is not included in this package. The glass surface resists everyday fingerprints and the viewing angles remain readable from off-centre positions. Makers who need HDMI input or a larger diagonal should look at alternative display families.

Pluspunten

  • 4-inch IPS panel gives clear visuals at 480×800 resolution
  • Capacitive touch recognises up to five simultaneous points
  • Works with Raspberry Pi 4B, 3B+ and 3A+ out of the box
  • Compatible with Compute Module 3+ and 4 using an extra adapter board

Specificaties

BrandLORDWORLD

Vragen over dit artikel

What interface does the 480×800 display use and what does it limit?

The DSI interface caps the display to Raspberry Pi boards that expose a DSI connector; CM3+ and CM4 need an extra adapter board to connect.

What physical mounting does the development board require?

It mounts directly onto the 40-pin GPIO header of Pi 4B, 3B+ or 3A+; CM3+ and CM4 require a separate adapter board for mechanical fit.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.