暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料（保険付き）。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料（保険付き）。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン
LORDWORLD 4 inch capacitive touch display board with IPS panel showing 480 by 800 resolution

LORDWORLD

LORDWORLD 4inch Capacitive Touch Display 480×800 development board

SKU CH-2MYJ-5VFWS

A 480×800 capacitive touch display with five-point input that connects via DSI to Raspberry Pi 4B, 3B+, 3A+ and Compute Modules 3+ or 4 using an adapter board

  • 4-inch IPS panel gives clear visuals at 480×800 resolution
  • Capacitive touch recognises up to five simultaneous points
  • Works with Raspberry Pi 4B, 3B+ and 3A+ out of the box
  • Compatible with Compute Module 3+ and 4 using an extra adapter board

4-inch Capacitive Touch Display for Raspberry Pi

The LORDWORLD panel provides a 480×800 IPS screen with five-point capacitive touch for Raspberry Pi OS projects. It connects through the DSI interface on Pi 4B, 3B+, 3A+, CM3+ and CM4 modules. A software driver must be installed before the touch layer becomes active. Developers building handheld or kiosk interfaces can start prototyping immediately.

DSI Connection and Adapter Requirements

The board mounts directly to the Pi's DSI ribbon socket, keeping the internal layout compact for embedded enclosures. CM3+ and CM4 modules need a separate adapter board that is not included in this package. The glass surface resists everyday fingerprints and the viewing angles remain readable from off-centre positions. Makers who need HDMI input or a larger diagonal should look at alternative display families.

特長

  • 4-inch IPS panel gives clear visuals at 480×800 resolution
  • Capacitive touch recognises up to five simultaneous points
  • Works with Raspberry Pi 4B, 3B+ and 3A+ out of the box
  • Compatible with Compute Module 3+ and 4 using an extra adapter board

仕様

BrandLORDWORLD

この商品に関する質問

What interface does the 480×800 display use and what does it limit?

The DSI interface caps the display to Raspberry Pi boards that expose a DSI connector; CM3+ and CM4 need an extra adapter board to connect.

What physical mounting does the development board require?

It mounts directly onto the 40-pin GPIO header of Pi 4B, 3B+ or 3A+; CM3+ and CM4 require a separate adapter board for mechanical fit.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。