Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Green rectangular development board with silver castellated module, black Type-C port and gold pin headers along the edges

LORDWORLD

LORDWORLD ESP32-C6 Development Board WiFi 6 Bluetooth 5 8MB Flash RISC-V 32-bit 160MHz Pre-soldered Header

SKU CH-3XGV-DS3K7

ESP32-C6 development board with RISC-V 32-bit single-core processor at 160MHz, 8MB Flash, WiFi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread), pre-soldered headers and USB-C with CH343/CH334

  • RISC-V 32-bit single-core processor runs up to 160MHz for responsive IoT edge tasks
  • 8MB Flash built into the ESP32-C6-WROOM-1-N8 module stores firmware and data locally
  • WiFi 6 plus Bluetooth 5 and IEEE 802.15.4 enable Zigbee 3.0 and Thread mesh networking
  • USB Type-C with onboard CH343 and CH334 chips handles USB and UART development over one cable
  • Pinout compatible with ESP32-C6-DevKitC-1-N8 and castellated module allows direct soldering to carrier boards

ESP32-C6 RISC-V Development Board

The LORDWORLD ESP32-C6 board targets makers and engineers prototyping IoT edge devices that require WiFi 6, Bluetooth 5 and IEEE 802.15.4 connectivity. It ships with pre-soldered headers and a castellated module option for direct carrier-board integration.

Thermals Noise and Power Draw

The 32-bit single-core RISC-V processor runs at up to 160MHz while the onboard CH343 and CH334 chips handle USB-to-UART conversion over a Type-C connector. Typical development workloads draw modest current and produce minimal heat without active cooling.

8MB Flash and Wireless Protocol Support

Built-in 8MB Flash stores firmware for WiFi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) stacks. Projects needing larger external flash, cellular radios or multi-core processing must select a different module.

Pluspunten

  • RISC-V 32-bit single-core processor runs up to 160MHz for responsive IoT edge tasks
  • 8MB Flash built into the ESP32-C6-WROOM-1-N8 module stores firmware and data locally
  • WiFi 6 plus Bluetooth 5 and IEEE 802.15.4 enable Zigbee 3.0 and Thread mesh networking
  • USB Type-C with onboard CH343 and CH334 chips handles USB and UART development over one cable
  • Pinout compatible with ESP32-C6-DevKitC-1-N8 and castellated module allows direct soldering to carrier boards

Specificaties

BrandLORDWORLD

Vragen over dit artikel

How do I install the board and what step do people often miss?

Plug the Type-C cable to power the board and enable the CH343 and CH334 USB-UART bridge; the step often missed is installing the CH343 driver so the COM port appears in the IDE.

What maintenance or replacement will this board need later?

The 8MB flash is soldered to the ESP32-C6-WROOM-1-N8 module and cannot be swapped; only the pre-soldered header pins may need re-soldering if they are damaged.

What limit appears first under sustained 160MHz load?

The RISC-V 32-bit single-core processor running at 160MHz becomes the throughput bottleneck before WiFi 6, Bluetooth 5 or IEEE 802.15.4 radio limits are reached.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.