저희는 암호화폐로 결제를 받습니다 — 보유하신 코인으로 실제 하드웨어를 구매하실 수 있습니다.암호화폐로 결제하고, 실제 하드웨어 구매에 사용하십시오. 전 세계 어디서나 US$399 이상 구매 시 무료 보험 배송. 무지 상자에 담아 독일에서 발송합니다.US$399 이상 구매 시 무료 보험 배송. 체크아웃을 시작하면 30분 동안 환율이 잠깁니다.30분간 환율 잠금. 모든 제품은 밀봉된 상태로 일련번호를 확인한 후 24개월 보증을 제공합니다.밀봉 포장, 24개월 보증.

가격 추적 로그인

LORDWORLD

LORDWORLD ESP32-C6 Development Board WiFi 6 Bluetooth 5 8MB Flash RISC-V 32-bit 160MHz Pre-soldered Header

SKU CH-3XGV-DS3K7

ESP32-C6 development board with RISC-V 32-bit single-core processor at 160MHz, 8MB Flash, WiFi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread), pre-soldered headers and USB-C with CH343/CH334

  • RISC-V 32-bit single-core processor runs up to 160MHz for responsive IoT edge tasks
  • 8MB Flash built into the ESP32-C6-WROOM-1-N8 module stores firmware and data locally
  • WiFi 6 plus Bluetooth 5 and IEEE 802.15.4 enable Zigbee 3.0 and Thread mesh networking
  • USB Type-C with onboard CH343 and CH334 chips handles USB and UART development over one cable
  • Pinout compatible with ESP32-C6-DevKitC-1-N8 and castellated module allows direct soldering to carrier boards

ESP32-C6 RISC-V Development Board

The LORDWORLD ESP32-C6 board targets makers and engineers prototyping IoT edge devices that require WiFi 6, Bluetooth 5 and IEEE 802.15.4 connectivity. It ships with pre-soldered headers and a castellated module option for direct carrier-board integration.

Thermals Noise and Power Draw

The 32-bit single-core RISC-V processor runs at up to 160MHz while the onboard CH343 and CH334 chips handle USB-to-UART conversion over a Type-C connector. Typical development workloads draw modest current and produce minimal heat without active cooling.

8MB Flash and Wireless Protocol Support

Built-in 8MB Flash stores firmware for WiFi 6, Bluetooth 5 and IEEE 802.15.4 (Zigbee 3.0 and Thread) stacks. Projects needing larger external flash, cellular radios or multi-core processing must select a different module.

주요 특징

  • RISC-V 32-bit single-core processor runs up to 160MHz for responsive IoT edge tasks
  • 8MB Flash built into the ESP32-C6-WROOM-1-N8 module stores firmware and data locally
  • WiFi 6 plus Bluetooth 5 and IEEE 802.15.4 enable Zigbee 3.0 and Thread mesh networking
  • USB Type-C with onboard CH343 and CH334 chips handles USB and UART development over one cable
  • Pinout compatible with ESP32-C6-DevKitC-1-N8 and castellated module allows direct soldering to carrier boards

사양

BrandLORDWORLD

이 상품에 대한 질문

How do I install the board and what step do people often miss?

Plug the Type-C cable to power the board and enable the CH343 and CH334 USB-UART bridge; the step often missed is installing the CH343 driver so the COM port appears in the IDE.

What maintenance or replacement will this board need later?

The 8MB flash is soldered to the ESP32-C6-WROOM-1-N8 module and cannot be swapped; only the pre-soldered header pins may need re-soldering if they are damaged.

What limit appears first under sustained 160MHz load?

The RISC-V 32-bit single-core processor running at 160MHz becomes the throughput bottleneck before WiFi 6, Bluetooth 5 or IEEE 802.15.4 radio limits are reached.

이 진열대의 다른 상품

고객들이 함께 비교한 상품

같은 진열대, 같은 체크아웃 — 코인 8종, 환율 잠금 30분.