Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Open-frame power supply board with soldered components, green PCB, no enclosure

Mean Well

Mean Well PS-45-24 45.6W 24V 1.9A power supply

SKU CH-TCYA-Y0FHG

Open-frame AC-DC unit delivers 45.6 W at 24 V and 1.9 A for industrial equipment

  • TypeAT
  • Delivers stable 24 V output for industrial equipment
  • 6 W continuous power handles moderate loads
  • 9 A current rating suits typical 24 V circuits
  • Open-frame PCB design fits standard enclosures
  • 100 % original Mean Well unit verified by serial number

Industrial open-frame AC-DC supply

The Mean Well PS-45-24 is a 45.6 W single-output unit that delivers 24 V at 1.9 A from an AC mains input. It uses an AT-type layout on a bare PCB, making it suitable for integration into custom enclosures, test rigs or OEM equipment where a compact board-level source is required.

Fits board-level builds, not ATX cases

Engineers designing embedded systems, LED drivers or industrial controllers will appreciate the fixed 24 V rail and open-frame form factor. Builders who need a standard ATX connector set, power-factor correction or a cased unit with fan cooling should look elsewhere.

Steady 45.6 W under continuous load

The supply is rated for its full 45.6 W output during sustained operation, not just peak bursts. With no power-factor correction stage, input current waveform remains non-sinusoidal, so installers should verify harmonic limits if the installation falls under applicable regulations.

Pluspunten

  • Delivers stable 24 V output for industrial equipment
  • 6 W continuous power handles moderate loads
  • 9 A current rating suits typical 24 V circuits
  • Open-frame PCB design fits standard enclosures
  • 100 % original Mean Well unit verified by serial number

Specificaties

TypeAT

Vragen over dit artikel

What AC input voltage range does the PS-45-24 accept for operation?

The PS-45-24 is an AC-DC switching power supply designed to convert mains alternating current into a regulated 24 V DC output for industrial equipment.

Can the PS-45-24 replace an older 24 V supply that delivered less than 1.9 A?

Yes, the PS-45-24 provides 24 V at up to 1.9 A, so it can power loads that previously drew less current while maintaining the same voltage.

How can I verify the PS-45-24 is delivering the correct 24 V output after wiring it?

Measure the output terminals with a multimeter set to DC volts; a reading close to 24 V confirms the unit is regulating correctly under load.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.