Wij accepteren cryptovaluta — zo kunnen de munten die u bezit echte hardware kopen.Betaal in crypto, besteed het aan echte hardware. Gratis verzekerde verzending wereldwijd vanaf $399. Neutrale dozen zonder merk, verzonden vanuit Duitsland.Gratis verzekerde verzending vanaf $399. Uw koers wordt 30 minuten vastgezet zodra het afrekenen begint.Koers 30 minuten vastgezet. Elk artikel is verzegeld, het serienummer wordt gecontroleerd, en het valt onder 24 maanden garantie.Verzegeld, 24 maanden garantie.

Favoriete artikelen Inloggen
Open-frame PCB power supply, green board, dual output, compact 4 by 2 inch footprint

myVolts

myVolts RPD-60B 60W dual-output power supply 5V 12V 24V

SKU CH-XR60-01M3E

Delivers 60 W dual output at 5 V and 12 V or 5 V and 24 V for medical devices

  • TypeAT
  • Medical-grade safety with 2×MOPP certification for patient-connected devices
  • Dual 5V/12V outputs deliver 60W total power for versatile medical equipment
  • 90-264VAC universal input enables worldwide deployment without voltage switching
  • Extremely low leakage current under 150µA meets BF application requirements
  • Compact 4×2 inch open-frame design fits space-constrained medical installations

Medical-grade dual-output supply

The myVolts RPD-60B is a 60W open-frame PCB power supply certified to 2 x MOPP under IEC/EN 60601-1. It accepts 90-264Vac input and provides regulated 5V and 12V or 5V and 24V rails for medical devices such as oral irrigators, hemodialysis machines, monitors and sleep-apnea units.

Replaces bulky linear or uncertified units

Engineers swapping out oversized linear supplies or non-medical brick adapters gain a 4 by 2 inch footprint with EMI class B compliance and leakage current below 150 µA. The jump is worth it when BF-rated patient contact and 2 x MOPP isolation are mandatory for regulatory approval.

Sustained load behaviour

Free-air convection cooling delivers continuous rated power without forced airflow. Short-circuit, overload and over-voltage protections latch off safely, while the green-design topology maintains efficiency across the full input range during 24-hour operation in clinical environments.

Pluspunten

  • Medical-grade safety with 2×MOPP certification for patient-connected devices
  • Dual 5V/12V outputs deliver 60W total power for versatile medical equipment
  • 90-264VAC universal input enables worldwide deployment without voltage switching
  • Extremely low leakage current under 150µA meets BF application requirements
  • Compact 4×2 inch open-frame design fits space-constrained medical installations

Specificaties

TypeAT

Vragen over dit artikel

What are the 4" × 2" mounting dimensions for this open-frame PCB supply?

The unit uses a 4-inch by 2-inch footprint with mounting holes on that pattern, so it fits standard open-frame brackets or standoffs spaced to those centres.

How do I wire the dual outputs and what polarity mistake should I avoid?

Connect 5 V at up to 5.5 A and 12 V at up to 2.2 A to the marked terminals; the common error is reversing the 5 V and 12 V leads because both share the same ground reference.

When will the convection-cooled unit need its electrolytic capacitors refreshed?

Under continuous load the internal capacitors typically reach end-of-life after 30 years, so plan a recap around that interval if the supply runs 24/7.

Ook in deze afdeling

Klanten vergeleken ook

Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.