NEMIX RAM
NEMIX RAM 128GB (2x64GB) DDR5 4800 ECC RDIMM 2Rx4 CL40 1.1V 288-Pin Dell PowerEdge XE9640 memory upgrade
128 GB DDR5 ECC registered server memory kit, two 64 GB modules at 4800 MT/s with CL40 latency and 1.1 V operation for Dell PowerEdge XE9640
- Capacity128GB (2 x 64GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 128 GB total capacity from two 64 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- ECC registered RDIMM protects data integrity
- 2Rx4 dual-rank organisation optimises density
- 1 V operation at CL40 latency for Dell PowerEdge XE9640
Dell PowerEdge XE9640 server memory upgrade
This 128 GB kit uses two 64 GB DDR5 4800 ECC registered DIMMs built for the Dell PowerEdge XE9640 rack server. Each module runs at 1.1 V with CL40 latency and a 2Rx4 organisation. The registered buffer and on-die ECC protect data integrity in multi-socket workloads.
288-pin RDIMM kit for registered DDR5 slots
The modules install directly into the server’s 288-pin DDR5 RDIMM sockets and require a platform that supports registered ECC memory. Two slots are consumed, leaving remaining channels free for further capacity expansion. No heat spreader is fitted, so airflow across the bare PCB is required.
1.1 V operation at DDR5 4800 speed
Standard JEDEC 1.1 V voltage keeps power draw low while delivering PC5-38400 bandwidth. Registered buffering adds minimal latency and reduces electrical load on the memory controller. With no onboard thermal solution, system fans must move enough air to keep the modules within spec under sustained load.
Pluspunten
- 128 GB total capacity from two 64 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- ECC registered RDIMM protects data integrity
- 2Rx4 dual-rank organisation optimises density
- 1 V operation at CL40 latency for Dell PowerEdge XE9640
Specificaties
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-924K2 |
| Capacity | 128GB (2 x 64GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 128GB (2X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
Vragen over dit artikel
Does the CL40 latency become a bottleneck during sustained workloads?
CL40 is the rated CAS latency for these DDR5 4800 modules; actual sustained throughput depends on the Dell PowerEdge XE9640 memory controller and workload mix.
What thermal or power behaviour should be expected when the kit runs continuously at 1.1V?
The modules operate at 1.1V without heat spreaders; thermals are managed by the server chassis airflow and the registered buffer reduces electrical load on the memory bus.
Which server configuration is required before installing this 2Rx4 registered ECC kit?
The kit is validated for Dell PowerEdge XE9640 systems that support DDR5 4800 registered ECC RDIMMs in a 288-pin slot population.
Ook in deze afdeling
Klanten vergeleken ook
Dezelfde afdeling, dezelfde kassa — acht munten en een koers die 30 minuten vaststaat.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



